00193906-05.pdf - 第15页
Software Installation Manual Windows 2000 Professional for SIPLACE Computer Edition 03/2006 US + DE 5.1.9 Display of the c onfigured information Here you will find a display with all configured netwo rk parameters (check…
Software Installation Manual Windows 2000 Professional for SIPLACE Computer Edition 03/2006 US + DE
5.1.8 Windows 2000 network settings
Within this dialog, general network parameters of the computer will be configured. The following data
are required:
Workgroup Name: SIPLACE
You can enter any name you want. (Default: SIPLACE)
IP address: not fixed
Use a unique IP address number (172.x.x.x).
IP address Gateway: not fixed
Sub net mask: not fixed
Please use the default data for the computer.
System name: should be unique in the network.
You should change this name.
Fig. 5-7: Network settings
→ Please enter the data.
→ Click the Next button.
14
Software Installation Manual Windows 2000 Professional for SIPLACE Computer Edition 03/2006 US + DE
5.1.9 Display of the configured information
Here you will find a display with all configured network parameters (check display). You can change
the data if necessary by clicking the Back button
Fig. 5-8: Configurations
→ Check the information.
→ Click the Next button.
5.1.10 Completion Message
The installation takes 30 to 45 minutes. When it is complete, you see the following message:
Fig. 5-9: Finish message
15
Software Installation Manual Windows 2000 Professional for SIPLACE Computer Edition 03/2006 US + DE
16
5.2 Default settings and final administration tasks for the SIPLACE Pro
computer
5.2.1 Default Settings
- Screen area: 1024 x 786, 16777216 Colors, 72 Hz Refresh Frequency
- Time Zone: GMT (London, Edinburgh, Lissabon)
- Keyboard-Layout: English
- Network Protocol: TCP/IP
- In addition to the default user groups of Windows 2000 Professional, the following users and user
groups will be configured:
- User: plr, SIPLACEServices, SIPLACEAdmin
5.2.2 Passwords
5.2.2.1 Administrator
After the unattended setup, the default password for the local administrator is MS128. Please assign a
new password for your administrator!
5.2.2.2 plr
The default user „plr“ has the default password plr.
5.2.2.3 SIPLACEServices
The user „SIPLACEServices” is created for the COM+ Components. Please don’t change the
password. Otherwise the necessary rights of the SIPLACEPro Components will be lost!
The password is chephren.
5.2.2.4 Administrator group
The local administrator group also has the user „SIPLACEAdmin“. Don’t remove this user from the
group. Otherwise the Siemens Personnel can’t perform any maintenance. The SIPLACE Service
Personnel knows the password. Don’t change the password.