00193906-05.pdf - 第7页

Software Installation Manual Windows 2000 Professional for SIPLACE Computer Edition 03/2006 US + DE 7 3.2 Required configuration p arameters For the installation procedure, plea se note the following information: No. Inf…

100%1 / 30
Software Installation Manual Windows 2000 Professional for SIPLACE Computer Edition 03/2006 US + DE
6
2 Scope of delivery
Windows 2000 Professional for SIPLACE computer
Order No: 00368071-03
CD ROM: „Boot CD ROM for Windows 2000 Professional Operating system“
Documentation: Software Installation Manual English/German
3 Requirements
3.1 Hardware
To operate successfully with Windows 2000 Professional, you have to check the following
requirements:
- The computer must have minimum 128 MB RAM.
- Supported Computer Hardware:
- Fujitsu Siemens Computers
- SCENIC 600 P
- SCENIC 600 N
- Econel 30
- Econel 40
- Econel 50
Software Installation Manual Windows 2000 Professional for SIPLACE Computer Edition 03/2006 US + DE
7
3.2 Required configuration parameters
For the installation procedure, please note the following information:
No. Information
1 User Name
2 Company Name
3 IP address of the SIPLACEPro system (Default: 172.22.100.100)
4 IP address of the default gateways (Optional, if no Remote Support was installedÆ no entry.
Default: no entry).
5 Subnet mask of the local IP network
Table 1: Required configuration parameters
→ Please contact your SIPLACE administrator or your network administrator if the information is not
available.
4 Bugfixing
4.1 Hotfixes for the operating system
SP4
KB823182 KB824146 KB824151 KB825119 KB826232 KB828035
KB828741 KB828749 KB830352 KB835732 KB837001 KB839645
KB840315 KB840987 KB841356 KB841533 KB841872 KB841873
KB842526 KB870669 KB870763 KB871250 KB873339 KB883935
KB885835 KB885836 KB890175 KB891711 Q832483 Q832894
4.2 Hotfixes for Internet Explorer
SP1
Q832894 Q867801 KB889293
Software Installation Manual Windows 2000 Professional for SIPLACE Computer Edition 03/2006 US + DE
5 Installation
5.1 Installation Steps
5.1.1 Notes
Note:
In the general part of the setup, you have to answer with „Yes“ or „No“. In the second
part you can switch between the wizard dialogs with „Next“ or „Back“ buttons.
With the „Cancel“ button you can abort the whole installation procedure.
5.1.2 Installation Procedure
→ Insert the BOOT CD-ROM (Boot CDROM for Windows 2000 Professional) to start the unattended
setup into the CD ROM drive.
→ Reboot the computer.
→ Please change the boot devices in your BIOS if the system doesn’t accept the CD ROM drive as
the boot medium.
8