00193906-05.pdf - 第6页
Software Installation Manual Windows 2000 Professional for SIPLACE Computer Edition 03/2006 US + DE 6 2 Scope of delivery Windows 2000 Professional for SIPLACE compute r Order No: 00368071-03 CD ROM: „Boot CD ROM for Win…
Software Installation Manual Windows 2000 Professional for SIPLACE Computer Edition 03/2006 US + DE
1 General
1.1 License Agreement
Warning:
Please use this operating system only for SIPLACE machines and for computers with the
programming system SIPLACE Pro.
This CD contains pre-configured software with which to install a pre-set operating system on your
machine if it is a member of the SIPLACE family.
Siemens A&D AG has the sole responsibility for executing this software.
Siemens A&D AG provides support for this product.
1.2 Installation process
This manual describes the unattended Windows 2000 Professional Setup for SIPLACE programming
system computers.
The unattended setup was developed to execute a quick and complete installation of Windows 2000
Professional for all SIPLACE computers and to meet all requirements. The setup can be executed on
all computer systems described in chapter
Requirements. The unattended setup is a quick and
reliable alternative to the default Microsoft setup. The setup provides the Windows 2000 Professional
operating system only in English (American).
Since the CD-ROM is bootable, you can start the installation simply by rebooting the system with the
CD in the CD-ROM drive. This requires that BIOS is set up to boot from a CD before the hard drive.
Warning:
All data on the hard disk will be destroyed during the unattended setup. Therefore you have
to save necessary data before you start the setup.
The unattended setup will lead the user in English. Please refer to the following chapters.
During the installation you have to enter information about the system configuration (see chapter
„Required Parameters“).
5
Software Installation Manual Windows 2000 Professional for SIPLACE Computer Edition 03/2006 US + DE
6
2 Scope of delivery
Windows 2000 Professional for SIPLACE computer
Order No: 00368071-03
CD ROM: „Boot CD ROM for Windows 2000 Professional Operating system“
Documentation: Software Installation Manual English/German
3 Requirements
3.1 Hardware
To operate successfully with Windows 2000 Professional, you have to check the following
requirements:
- The computer must have minimum 128 MB RAM.
- Supported Computer Hardware:
- Fujitsu Siemens Computers
- SCENIC 600 P
- SCENIC 600 N
- Econel 30
- Econel 40
- Econel 50
Software Installation Manual Windows 2000 Professional for SIPLACE Computer Edition 03/2006 US + DE
7
3.2 Required configuration parameters
For the installation procedure, please note the following information:
No. Information
1 User Name
2 Company Name
3 IP address of the SIPLACEPro system (Default: 172.22.100.100)
4 IP address of the default gateways (Optional, if no Remote Support was installedÆ no entry.
Default: no entry).
5 Subnet mask of the local IP network
Table 1: Required configuration parameters
→ Please contact your SIPLACE administrator or your network administrator if the information is not
available.
4 Bugfixing
4.1 Hotfixes for the operating system
SP4
KB823182 KB824146 KB824151 KB825119 KB826232 KB828035
KB828741 KB828749 KB830352 KB835732 KB837001 KB839645
KB840315 KB840987 KB841356 KB841533 KB841872 KB841873
KB842526 KB870669 KB870763 KB871250 KB873339 KB883935
KB885835 KB885836 KB890175 KB891711 Q832483 Q832894
4.2 Hotfixes for Internet Explorer
SP1
Q832894 Q867801 KB889293