SIPLACE 80 F4_EN.pdf - 第17页

16 Description The SIPLACE Bulk C ase feeder with 2 track s is used to handle components in bul k. It trans ports rectangular and round p assive components. To replen ish the supply, the Bulk Ca ses are ex- changed, simp…

Description

The tape reels of the feeder mod-

ules are housed in the tape con-

tainer of the component changeo-

ver table. A cutter automatically

chops up empty tape coming out

of the tape container.

Feeders used on SIPLACE are dis-

tinguished by a short cycle time

and a high-precision pick-up posi-

tion. Even product diversity and

small batch sizes can be handled

easily since the feeder set-up can

be changed quickly. The increment

of the tape cycle is just as variable

as the use of tape materials.

Thanks to the general purpose

tape feeding modules which are

equally suitable for paper and blis-

ter tapes, a small range of module

types will suffice - a decisive ad-

vantage for investment and logis-

tics. Activated by a signal from the

component table, the modules

control the entire feeder sequence

themselves, including the auto-

matic take-up of the strips.

The S Feeders series feature

shorter cycle times and they can

handle tapes with 2 mm grids (8

mm S). 8 mm S and 12/16 mm S

are equipped with component

cover.

Component Supply:

Tape Feeder

Tape Feeder Modules S

72 mm S

56 mm S

44 mm S

24 / 32 mm S

12 / 16 mm S

2 x 8 mm S

Technical Data

Packaging Model

Feeder

locations

Transport

distance

Max. compo-

nent Height

Paper and bli-

ster tapes

2 x 8 mm S*

12/16 mm S

2 or 4 mm

4 - 12 mm**

2.5

14***

Blister tape

24/32 mm S

1 x 44 mm S

1 x 56 mm S

1 x 72 mm S

1.5

2.5

4 - 32 mm**

4 - 44 mm**

4 - 56 mm**

4 - 72 mm**

14***

Tape rolls

7" to 15" (178 - 381 mm)

Feeder cycle S-feeder to 20 mm transport distance < 150 ms

* Fiducial for recognition of position of feeders

** adjustable in increments of 4 mm

*** Only when a new cutter operating on compressed air is involved, otherwise the maximum

component height is about 10 mm.

Description

The SIPLACE Bulk Case feeder

with 2 tracks is used to handle

components in bulk. It transports

rectangular and round passive

components. To replenish the

supply, the Bulk Cases are ex-

changed, simply and without

stopping the machine.

Essentially, this feeder module

consists of the basic element plus

the suitable feeder rail and Bulk

Case for the component type and

height. The components are sepa-

rated and transported via com-

pressed air.

The principle of stationary compo-

nent tables has been tried and

tested specifically with Bulk

Cases. Vibrations which developed

when other placement methods

are used may cause wear, drasti-

cally affecting the component

quality.

The stationary component table

also brings decisive advantages for

stick magazines. The general pur-

pose vibratory stick feeder can be

refilled during the placement

process.

Component Supply:

Bulk Case Feeders, Stick Magazine Feeders

Technical Data

Bulk Case feeder*

Type of packaging

Bulk Case

Feeder rails for

Chip 0402 component height 0.35 mm

Chip 0402 component height 0.50 mm

Chip 0603 component height 0.45 mm

Chip 0603 component height 0.80 mm

Chip 0805 component height 0.45 mm

Chip 0805 component height 0.60 mm

Chip 0805 component height 0.85 mm

Chip 0805 component height 1.25 mm

Mini-Melf

Feeder location

1 feeder location for 2 different

component types

Stick magazine feeder Type III With control electronics

Number and width of tracks

3 x 9.5 mm

2 x 15 mm

1 x > 15 mm

1 x 30 mm

Feeder location 1

* Fiducial to recognize position of feeder

Bulk Case Feeder and Stick Feeders

Bulk Case Feeder

Stick Feeder

Type III

Danger

Some local safety requirements

dictate that all feeder locations

must be equipped with feeders.

If the feeder set-up does not fill all

feeder locations, guards (dummy

feeders) may be used in place of

the modules.

Component Supply:

Dummy Feeder

The following dummy feeder variants can be used:

Item no. 00116961-01

Item no. 00116962-01

Item no. 00116963-01

SIPLACE guard for 1 location

SIPLACE guard for 6 - 10 locations

SIPLACE guard for 11 - 20 locations

Various Dummy Feeders