SIPLACE 80 F4_EN.pdf - 第42页
41 Technical Data: Connections Pressure Supply Power Supply: 3 m Cable with CE KON-C onnector 3 x 16A PCB Transpor t Signal In terface LAN Supply 230 Inner Edge if Fixed S ide of Transport Connectio ns and Energy Re quir…
40
A detailed documentation of the
PCB transport signal interface is
available on request.
Technical Data:
Signal Interfaces
Conveyor 1 is Off Conveyor 2 is On
Conveyor 1 is Off Conveyor 2 is On
Requirement
Delivery
Permission
Receival
Requirement
Delivery
Permission
Receival
2. PCB handling has started
Conveyor 1 is On Conveyor 2 is On
Transport Direction
Conveyor Section 1
Conveyor Section 2
Station n
delivers PCB
to station n+1
Station n+1
waits for PCB
from station n
Requirement
Delivery
Permission
Receival
Requirement
Delivery
Permission
Receival
PCB
Sensor
Transport Direction
Conveyor Section 1
PCB
Sensor
Conveyor Section 2
Station n
has just
delivered PCB
Station n+1
waits for PCB from
station n, but has
not received it
PCB
Sensor
3. PCB is at delivery
Transport Direction
Conveyor Section 1
PCB
Sensor
Conveyor Section 2
Station n Station n+1
has just received
the PCB
Requirement
Delivery
Permission
Receival
Requirement
Delivery
Permission
Receival
4. PCB transport is finished
41
Technical Data:
Connections
Pressure Supply
Power Supply:
3 m Cable with
CEKON-Connector 3 x 16A
PCB Transport
Signal Interface
LAN Supply
230 Inner Edge if
Fixed Side of Transport
Connections and Energy Required
Mains voltage requirement
230/400 V∼ / 119/208 V∼
± 5%, 50/60 Hz
Total connected load 5 kVA
Gross output 5 kW
Fuses 3 x 16 A
Power outage max. 20 ms
Compressed air requirements min. 5.5 bar, 250 Nl/min
Compressed Air Specification
Particles: max. particle size by density,
based on ISO/DIS 8573-1 Class
Particle size
Particle density
0.1 µm
0.1 mg/m³
Dew:
Pressure dewpoint
Dewpoint
Class 4
+ 3° C
Oil:
max. oil content
Particle density
Class 1
0.01 mg/m³
42
Technical Data:
Dimensions and Set-Up Conditions
Values
Length 1587 mm
Width excluding Waffle Pack Changer 2425 mm
Width including Waffle Pack Changer 2700 mm
Height including warning lamp 1836 mm
Weight of basic module 1500 kg
Weight fully equipped excluding
Waffle Pack Changer 2000 kg
Weight fully equipped including
Waffle Pack Changer 2320 kg
Permissible surface load sub-floor
> 1 metric ton/m²
(weight when fully equipped /
erection area x safety margin)
Permissible environmental influences:
Room temperature
Humidity
Between 15° and 35°C
30-75%, on average not higher
than 45%, so that no conden-
sation can ever form on the
machine
Maximum noise development
74 dB
A
SIPLACE 80 F
4
1836
1836
252
252
300
740
300
740
1921
1921
2425
2700
1036
1036
1587
1587
375
350
1355
Height of PCB transport
830 ± 15 mm (standard)
900 ± 15 mm (option)
930 ± 15 mm (option)
950 ± 15 mm (option) SMEMA
Foot height 120 mm
All units in mm