Siplace TX-设备参数-EN.pdf - 第14页

14 Board conveyor Flexible dual conveyor Flexible dual conveyor The flexible dual conveyor has two conveyor tracks that are electrically and mechani- cally independen t of one another. The fixe d conveyor sides are both …

Placement heads

Nozzle changer

Technical data

Nozzle changer for the SIPLACE SpeedStar

Number of magazines 4

a) All magazines in the nozzle changer must be configured.

Number of nozzle holders 80

Standard configuration 4 magazines with 80 nozzle garages

Nozzle types 40xx

Nozzle changer for the SIPLACE MultiStar

Number of magazines 4

Number of nozzle holders 69

Standard configuration 3 magazines with 60 x 20xx nozzle garages

1 magazine with 9 x 28xx nozzle garages

Nozzle types 20xx, 28xx

Nozzle changer for the SIPLACE TwinStar

Number of magazines Max. 8 magazines for max. 16 nozzle garages

Number of nozzle holders may be freely configured

Standard configuration 3 magazines with two nozzle garages each

1 magazine with one nozzle garage

Nozzle types 4 xx with adapter

5xx (standard)

9 xx with adapter

Special nozzle, gripper

Board conveyor

Flexible dual conveyor

The flexible dual conveyor

has two conveyor tracks that

are electrically and mechani-

cally independent of one

another. The fixed conveyor

sides are both "outside" as a

default. As an option, the

fixed conveyor sides can be

selected as right/right or left/

left. The PCB dual conveyor

can also be operated as a

single conveyor, as an

option. In dual conveyor

mode, two boards are moved

into the placement machine

and placed either at the

same time (synchronous

mode) or alternatively (asyn-

chronous mode). This makes

it possible to process the top

and bottom sides of a board

in one line.

Synchronous mode

In synchronous mode, two

PCBs of the same size are

transported into the place-

ment position at the same

time. They are processed as

a common panel. When

using products with greatly

differing placement content,

common optimization

increases the performance of

the whole content on both

boards.

Asynchronous mode

In asynchronous mode, only

one PCB in a transport track

is processed. At the same

time, another PCB in the sec-

ond transport track is moved

into the placement position.

This saves the full conveying

time of one PCB, thus con-

siderably increasing perfor-

mance, particularly for PCBs

with a short cycle time.

I-Placement

The SIPLACE line achieves

top placement performance

with the use of I-Placement.

In this mode, the two heads

work simultaneously and

populate the PCB on the cor-

responding conveyor side,

totally independently of one

another. Short distances fur-

ther increase the output.

Borrow Performance

By facilitating simultaneous

production of two boards with

different contents in one line,

Borrow Performance is the

ideal addition to I-Placement.

In placement machines with

Borrow Performance, both

heads place the same board

in alternation The board in

the other conveyor lane is

simply transported through

the system. This makes it

possible to achieve the same

cycle time for both boards,

despite the different place-

ment contents.

Convoy Mode

When processing boards

with lengths shorter than 175

mm, Convey Mode moves

more boards into the place-

ment area and input con-

veyor section. While one

board is being processed,

the second one waits directly

behind it. The transportation

time is therefore reduced sig-

nificantly, especially in I-

Placement mode.

Flexible dual conveyor

Board conveyor

Technical data

Flexible dual conveyor Dual conveyor in

"single conveyor"

(optional) mode

Board dimensions

(length x width

)

a) When using board widths > 375 mm, make sure that the peripheral modules can also process these

board widths.

50 mm x 45 mm to

375 mm x 260 mm

50 mm x 45 mm to

375mm x 460mm

Stationary conveyor side Outside

Right / right

Left / left

Outside

Automatic electrical width adjust-

ment

Standard

PCB thickness

Standard 0.3 mm to 4.5 mm

PCB warpage See page 17

PCB weight

Standard

b) The board weight value refers to the weight of the board plus the weight of the components.

Max. 2.0 kg Max. 2.0 kg

Clearance on PCB underside 25 mm

PCB conveyor height

Option

Standard

Option SMEMA

900 mm

930 mm

950 mm

Type of interface

Standard SMEMA

Component-free PCB handling

edge

3 mm

PCB changeover time

Dual conveyor 1.3 seconds

0 seconds

c) With the "Convoy Mode" option. Without this option 1.8 seconds.

d) 0 seconds in synchronous mode

Key information for machines in combination with SIPLACE TX:

When setting up a machine (S; F, HS, HF, X or D-Series) next to a SIPLACE TX, be aware that there is limited room

between the two machines. In these cases, use a suitable conveyor extension to create room of 0.5m for the operator

between the two machines.