Siplace TX-设备参数-EN.pdf - 第15页

15 Board conveyor Technical data Flexible dual conveyo r Dual conveyor in "single conveyor" (optional) mo de Board dimensions (length x width a ) a) When using board widths > 375 mm, make sure that the perip…

Board conveyor

Flexible dual conveyor

The flexible dual conveyor

has two conveyor tracks that

are electrically and mechani-

cally independent of one

another. The fixed conveyor

sides are both "outside" as a

default. As an option, the

fixed conveyor sides can be

selected as right/right or left/

left. The PCB dual conveyor

can also be operated as a

single conveyor, as an

option. In dual conveyor

mode, two boards are moved

into the placement machine

and placed either at the

same time (synchronous

mode) or alternatively (asyn-

chronous mode). This makes

it possible to process the top

and bottom sides of a board

in one line.

Synchronous mode

In synchronous mode, two

PCBs of the same size are

transported into the place-

ment position at the same

time. They are processed as

a common panel. When

using products with greatly

differing placement content,

common optimization

increases the performance of

the whole content on both

boards.

Asynchronous mode

In asynchronous mode, only

one PCB in a transport track

is processed. At the same

time, another PCB in the sec-

ond transport track is moved

into the placement position.

This saves the full conveying

time of one PCB, thus con-

siderably increasing perfor-

mance, particularly for PCBs

with a short cycle time.

I-Placement

The SIPLACE line achieves

top placement performance

with the use of I-Placement.

In this mode, the two heads

work simultaneously and

populate the PCB on the cor-

responding conveyor side,

totally independently of one

another. Short distances fur-

ther increase the output.

Borrow Performance

By facilitating simultaneous

production of two boards with

different contents in one line,

Borrow Performance is the

ideal addition to I-Placement.

In placement machines with

Borrow Performance, both

heads place the same board

in alternation The board in

the other conveyor lane is

simply transported through

the system. This makes it

possible to achieve the same

cycle time for both boards,

despite the different place-

ment contents.

Convoy Mode

When processing boards

with lengths shorter than 175

mm, Convey Mode moves

more boards into the place-

ment area and input con-

veyor section. While one

board is being processed,

the second one waits directly

behind it. The transportation

time is therefore reduced sig-

nificantly, especially in I-

Placement mode.

Flexible dual conveyor

Board conveyor

Technical data

Flexible dual conveyor Dual conveyor in

"single conveyor"

(optional) mode

Board dimensions

(length x width

)

a) When using board widths > 375 mm, make sure that the peripheral modules can also process these

board widths.

50 mm x 45 mm to

375 mm x 260 mm

50 mm x 45 mm to

375mm x 460mm

Stationary conveyor side Outside

Right / right

Left / left

Outside

Automatic electrical width adjust-

ment

Standard

PCB thickness

Standard 0.3 mm to 4.5 mm

PCB warpage See page 17

PCB weight

Standard

b) The board weight value refers to the weight of the board plus the weight of the components.

Max. 2.0 kg Max. 2.0 kg

Clearance on PCB underside 25 mm

PCB conveyor height

Option

Standard

Option SMEMA

900 mm

930 mm

950 mm

Type of interface

Standard SMEMA

Component-free PCB handling

edge

3 mm

PCB changeover time

Dual conveyor 1.3 seconds

0 seconds

c) With the "Convoy Mode" option. Without this option 1.8 seconds.

d) 0 seconds in synchronous mode

Key information for machines in combination with SIPLACE TX:

When setting up a machine (S; F, HS, HF, X or D-Series) next to a SIPLACE TX, be aware that there is limited room

between the two machines. In these cases, use a suitable conveyor extension to create room of 0.5m for the operator

between the two machines.

Board conveyor

I-Placement

Alternating placement mode

Alternating placement or

I-Placement mode

Distance of outer conveyor

edges: 562 mm, 2 lanes, outer

conveyor edges fixed

Alternating placement mode

Distance of outer conveyor

edges: 562 mm, 2 lanes, right

conveyor edges fixed

Alternating placement mode

Distance of outer conveyor

edges: 460 mm, dual conveyor

in single conveyor mode, right

conveyor edge fixed

Max. 260

Movable conveyor side

Stationary conveyor side

a) The diagram only shows settings with a fixed righthand conveyor edge. A setting with the stationary conveyor

edge on the left is also possible. All dimensions in millimeters.

Max. 260

281

562

Min. 35

281

179

Max. 260

281

Min. 35

Max. 260

562

Max. 460

Adjustable conveyor side position and max. PCB width

Conveyor side position Max. PCB width Distance of fixed side for various fixed side position

settings

Inside Right or left

231 mm 210 mm 462 mm 248.5 mm

268 mm 250 mm 536 mm 285.5 mm

281 mm 260 mm 562 mm 298.5 mm

Machine center