Vakuum Tooling AMKOR X4 OS Applikation.pdf - 第42页
Installation instructions Vacuum Tooling AM KOR (001885 01-01) SIPLACE X4 / OS Application 03/2006 Edition 42 2.8 Pneumatic drawing 2 Fig. 2.8 - 1 Pneumatic plan
Installation instructions Vacuum Tooling AMKOR (00188501-01) SIPLACE X4 / OS Application
03/2006 Edition
41
2.7 Mechanics
2
Fig. 2.10 - 1 Customer application vacuum tooling (00378616-xx)
Installation instructions Vacuum Tooling AMKOR (00188501-01) SIPLACE X4 / OS Application
03/2006 Edition
42
2.8 Pneumatic drawing
2
Fig. 2.8 - 1 Pneumatic plan
Installation instructions Vacuum Tooling AMKOR (00188501-01) SIPLACE X4 / OS Application
03/2006 Edition
43
2.8.1 Compressed air supply
Direct connection to the X4 feeding area 3 is not possible, since this would exceed the specified
air consumption. An additional maintenance unit must therefore be installed in the pneumatic unit.
The customer must provide an additional compressed air line. 2
The maintenance unit is fitted in the feeding area 3 on a mounting plate. 2
2
2
2
2
2
2
2
Additional maintenance unit
in feeding area 3
Additional external
air connection