Vakuum Tooling AMKOR X4 OS Applikation.pdf - 第44页
Installation instructions Vacuum Tooling AM KOR (001885 01-01) SIPLACE X4 / OS Application 03/2006 Edition 44 Electrical wiring of the maintena nce unit 2 2 Fig. 2.1 1 - 1 Wir ing of maintenance unit 2 2
Installation instructions Vacuum Tooling AMKOR (00188501-01) SIPLACE X4 / OS Application
03/2006 Edition
43
2.8.1 Compressed air supply
Direct connection to the X4 feeding area 3 is not possible, since this would exceed the specified
air consumption. An additional maintenance unit must therefore be installed in the pneumatic unit.
The customer must provide an additional compressed air line. 2
The maintenance unit is fitted in the feeding area 3 on a mounting plate. 2
2
2
2
2
2
2
2
Additional maintenance unit
in feeding area 3
Additional external
air connection
Installation instructions Vacuum Tooling AMKOR (00188501-01) SIPLACE X4 / OS Application
03/2006 Edition
44
Electrical wiring of the maintenance unit 2
2
Fig. 2.11 - 1 Wiring of maintenance unit
2
2
Installation instructions Vacuum Tooling AMKOR (00188501-01) SIPLACE X4 / OS Application
03/2006 Edition
45
2
Fig. 2.11 - 2 Wiring of maintenance unit
2
2
2
2
X1qa +24V (Clamp 21-27)
X1qa PE (Clamp 1-3)
X1qa GND (Clamp 4-13)