2.VGOS V30 application software installation_upgrade manual.pdf - 第13页

For Users Serv i ce Information SI090100 2E- 003=VGOS V3 0 applicatio n software installatio n /upgrade manua l 13/24 Step 11 Exit the installation w izard. The InstallShiel d W iz ar d Completed window appears . Cl ick …

For Users

Service Information

SI0901002E-003=VGOS V30 application software installation/upgrade manual

12/24

Step 9 Start installing the application.

Review all your settings and change as necessary. Then start installation by selecting [Next

>].

Step 10 If the system software needs to be updated, the below message appears.

Complete the application upgrading first. Then back up the system full back-up data and

execute “V30 System Update”.

Note

For details about the system software updating, see “5 Update the system software”.

Review settings and select

[Next >].

This message appears only

when the system software

needs updating.

For Users

Service Information

SI0901002E-003=VGOS V30 application software installation/upgrade manual

13/24

Step 11 Exit the installation wizard.

The InstallShield Wizard Completed window appears. Click the [Finish] button. The machine

automatically executes shutdown process.

Step 12 Restart the machine and check the machine application version displayed at the lower

left of the screen.

Step 13 Restore the system data backup to the application.

See “YS series Programming Manual”, Chapter 6 Managing the data for information.

Note

After restoring the system data, check if any change has been made in the following settings

since backing up the system data and restore the settings as necessary.

· Re-register IP addresses if network connection is established.

· Rename computers and workgroups.

· Restore backed up board data to the machine. If board data is saved in a networked PC,

re-register destination directory to browse for board data.

For Users

Service Information

SI0901002E-003=VGOS V30 application software installation/upgrade manual

14/24

4 Upgrade the application software

Machine application software is upgraded to enable enhanced functions, accommodate to custom

software functions or for other reasons.

Step 1 Power on the machine and enter the Windows Mode.

Upon powering on the machine, the below window appears shortly. Click the [Windows

Mode] button before Countdown expires.

Step 2 Enter an Administrator’s password.

If a password has been registered, enter the password and click the [OK] button. If not, leave

the textbox empty and click the [OK] button.