2.VGOS V30 application software installation_upgrade manual.pdf - 第17页

For Users Serv i ce Information SI090100 2E- 003=VGOS V3 0 applicatio n software installatio n /upgrade manua l 17/24 Step 8 Confirm deletion of u nnecessary f iles. If unnecessary files are found in the “ TEMP ” folder …

100%1 / 24
For Users
Service Information
SI0901002E-003=VGOS V30 application software installation/upgrade manual
16/24
Step 5 Select a language for setup procedure.
Step 6 Installation wizard starts.
When installation starts properly, the following dialog appears asking you to continue the
process. Click the [Next] button.
Step 7 Check the contents of the dialog and click the [Yes] button.
Confirm USER LICENSE
AGREEMENT and select [Yes].
For Users
Service Information
SI0901002E-003=VGOS V30 application software installation/upgrade manual
17/24
Step 8 Confirm deletion of unnecessary files.
If unnecessary files are found in the “TEMP” folder in the D drive, the Confirm Delete Files
window appears asking you whether to delete the files. If it is OK to delete, click the [Next]
button.
Step 9 Confirm if the system data has been backed up.
The window appears asking you whether you have your system data backed up. If you have
as shown in “1.2 Save “system data backup”” on page 3, click the [Next] button.
Step 10 Confirm whether to update the Spec Info.
To update the standard feeder timer info., feeder size info. and nozzle spec info., tick their
boxes and click the [Next] button. To retain existing information in such case as the
information has been customized, clear the boxes and click the [Next] button.
For Users
Service Information
SI0901002E-003=VGOS V30 application software installation/upgrade manual
18/24
Step 11 Start installing the application.
Review all your settings and change as necessary. Then start installation by selecting [Next
>].
Select languages and select
[Next >].
Review settings and select
[Next >].