00196378-0102_UM X-Feeder_EN.pdf - 第105页
Accessories Connecting the Tapes Tape Splicing Tool for SMD Tape Connections User Manual X Feeder M odules SIPLACE Family 105 6.4.6.4 Examples of Correct Splice Connections The cover foil over lap is missing. The adhesiv…
Accessories
Tape Splicing Tool for SMD Tape Connections Connecting the Tapes
104 User Manual X Feeder Modules SIPLACE Family
Tapes with perforations on both sides
►Insert a splicing plate onto the two middle pins of the open splice tool, with the raised "spikes"
showing upwards.
►Take the tape which has been spliced on one side and place its splice point in the middle of the
splicing plate.
Make sure that all 4 pins engage in the tape perforations.
►Turn the swivelling latches on the left and right to the front, to fix the tape into place in this position.
►Press the splice tool together until its head opens.
►Turn the swivelling latches on the left and right towards the back.
You can now take the spliced tape out of the splice tool.
►Check the quality of the join.
6.4.6.3 Checking the Join: Examples of Incorrect Connections
NOTICE
When using tapes with perforations on both sides, proceed as described above. Afterwards,
join the tape at the second perforation with another splicing plate.
The component pocket is cut open.
The gap between the tape ends is
too large.
The tape is folded at the splice
point.
Accessories
Connecting the Tapes Tape Splicing Tool for SMD Tape Connections
User Manual X Feeder Modules SIPLACE Family 105
6.4.6.4 Examples of Correct Splice Connections
The cover foil overlap is missing.
The adhesive strip is not positioned
correctly.
X: adhesive strip is too narrow
Y: distance to perforation is too large
Z: adhesive strip not centered
The distance between the tape
pockets is too small.
Legend:
1 8 mm paper tape 5 24 mm blister tape
2 8 mm blister tape 6 32 mm blister tape
3 12 mm blister tape 7 44 mm blister tape
4 16 mm blister tape 8 56 mm blister tape
Accessories
Tape Splicing Tool for SMD Tape Connections Accessories for the Accessories
106 User Manual X Feeder Modules SIPLACE Family
6.4.7 Accessories for the Accessories
For optimum tape splicing, you can order the following items:
▪ SIPLACE Operator Kit [ 00349303-xx]
The Operator Kit contains 1 leather case, 1 pair SMD tweezers, 1 small slotted screwdriver, 1 small
Phillips screwdriver, 1 pair scissors and 1 brush.
▪ Tray for tape connector [00362492-xx]
▪ Splice tool holder [00362493-xx]
▪ Splice Cart [03073452-xx]
The documentation for correct splicing of tapes is also available as a poster or job guide
▪ Job Poster "Splicing the Carrier Tape" (Deutsch: [00192460-xx], English: [00192461-xx], other
languages on request)
▪ Job Guide "Feeder Modules" (Deutsch: [00191256-xx], English: [00191257-xx], other languages on
request)