TT5064_UserDefinition_MachineSetup_ManualRev1.pdf - 第3页
SMT Software En gineering Group IMOperations YAMAHAMOTORCO.,LTD. MD OC-SOFT50064 3/12 4. Usage W hen the setup w ork of t he “User Definition” is necessary , [User D efinition Setup:…] is display…
SMT Software Engineering Group
IMOperationsYAMAHAMOTORCO.,LTD.
MDOC-SOFT50064
2/12
1. Introduction
The target model and version are as follows.
Table1.1 Target model and version
Item Object Remarks
Target models YS Series Mounter, YSP
YG12 Series Mounter, YG300
Target version V3.22STD R1.000 or later
2. Outline
Setup of the “User Definition" is a means to do "Setup Verify" of Item other than the parts.
As a result, "Setup Verify" of Item other than surface-mounted components become
possible, and mis-setup is prevented.
Ex.
“Backup”
(Plate of pushup pin. In the machine for Twin push-up, a necessary count changes by
the board.)
“Bare board pack”
It is necessary to register items other than surface-mounted components as IDs, perform
the following procedure to use the function.
1. Setting method of “User Definition”
・ Refer to "ID Editor User Definition" Manual.
2. Registration method of check item
・ Refer to "User Definition Setting Item Editor" Manual. (The check item of each Board
is set.)
3. Method of setup “User Definition”
・ Refer to this material.
3. Setting
The “User Definition” is one of "Setup verify" function.
When "Setup verify" is available, it is possible to use it.
SMT Software Engineering Group
IMOperationsYAMAHAMOTORCO.,LTD.
MDOC-SOFT50064
3/12
4. Usage
When the setup work of the “User Definition” is necessary, [User Definition Setup:…] is
displayed in [Monitor] - [Production] - [Operating Navigation].
Figure4.1 Production Monitor
4.1 Display of setup information on “User Definition”
To check setup of "User Definition" insufficient in the start production, the setup situation is
displayed.
When [User Definition] button* is clicked, [Monitor] – [Production] is started.
*The [User Definition] button is available when the check items of the read board data
other than parts are registered.
Figure4.1.1 User definition information dialog start
SMT Software Engineering Group
IMOperationsYAMAHAMOTORCO.,LTD.
MDOC-SOFT50064
4/12
Figure4.1.2 User definition information dialog display item
No.
Item name Explanation
1
Operating
Navigation
Requested operation is displayed.
2 Scanning Object
"User Definition _ Name" to be scanned is displayed.
3 Num. "User Definition _ Number" set by "ID Editor" is displayed.
4 Name "User Definition _ Name" set by "ID Editor" is displayed.
5 Now Item
"Item Name" that has been setup is displayed in the machine
now.
6 Request Item
"Item Name" requested to be setup with the board is displayed
now.
7 Setup Situation "Setup OK" displays "Green" and "Setup NG" displays "Red".
1
11
1
2
22
2
3
33
3
6
66
6
5
55
5
4
44
4
7
77
7