00198374-03_UG_OSC-Paket_R19-1_DE_EN.pdf - 第56页
56 Bedienungsanleitung OSC Package User Guide OSC-Paket 05/2019 Contents 5 Restrictions .. 99 6 Tips and Tricks .. 101 6.1 Stereo Measurement for THT Pins .. 101 6.2 Customer-specific Pattern Features .. 101
55Bedienungsanleitung OSC Package User Guide OSC-Paket 05/2019
Contents
Contents
1 Introduction.. 57
1.1 Brief description.. 57
1.2 General information.. 58
1.2.1 Legend.. 58
1.2.2 ASM on the World Wide Web (WWW).. 58
2 Scope of delivery.. 59
3 Prerequisites.. 61
3.1 Software Requirements.. 61
3.2 Hardware Requirements.. 61
4 Working with the OSC Features.. 63
4.1 Placement of Snap-In Components (from R16-2).. 63
4.1.1 Procedure.. 64
4.1.2 Application Example.. 65
4.1.3 Improved Teaching (from R18-2).. 67
4.2 Stereo Measurement for THT Pins (from R16-2).. 68
4.2.1 Procedure.. 69
4.2.2 Application Example.. 70
4.2.3 Stereo Measurement for Gullwings and Pattern Features (from R18-2).. 73
4.2.4 Stereo Measurement – Measurement Parameter 4x Image Capture (from R18-2).. 73
4.3 Customer-specific Pattern Features (from R16-2).. 75
4.3.1 Procedure.. 76
4.3.2 Application Example.. 77
4.4 Special Position Evaluation (from R16-2).. 79
4.4.1 Procedure.. 80
4.4.2 Application Example.. 81
4.5 Finding Best Acceleration (from R16-2).. 82
4.5.1 Procedure.. 83
4.5.2 Application Example.. 84
4.6 Placement of Components with Centering Pins – PininPaste Height Check (from
R18-2).. 87
4.6.1 Procedure.. 88
4.6.2 Application Example.. 89
4.7 Automatic Illumination Optimization (from R18-2).. 91
4.7.1 Application Example.. 92
4.8 Placement of An Exceptionally High Component (fromR18-2).. 93
4.8.1 Procedure.. 94
4.8.2 Application Example.. 95
4.9 Placement Head TH – Increased Placement Force (fromR18-2).. 96
4.10 Placement of Tall Components (from R19-1).. 97
4.11 Component Chipping Detection (from R19-1).. 98
1 Introduction
1.1 Brief description
Bedienungsanleitung OSC Package User Guide OSC-Paket 05/2019 57
1 Introduction
This guide gives an overview of the contents of the ASM OSC package. Here you will find all key
information needed for working with the features of the ASM OSC Package.
1.1 Brief description
Components with irregular component shapes outside the standard range are referred to as Odd
Shape Components – (OSC). When handling odd shape components, the trend is towards in-
creased automation in the placement line with the following target:
●
Reduce manufacturing costs
●
Maximize product quality by avoiding human error factors
●
Reduce manual workstations at the line and thus optimize the floor size
From R16-2, SIPLACE supports new features for odd shape components that have been collected
into the licensed OSC Package option. This extends the range of components that can be as-
sembled by a SIPLACE machine.
Following features are supported by the OSC Package from R16-2:
●
Improved placement of snap-in components
●
Stereo Measurement for THT Pins
●
Customer-specific Pattern Features
●
Special position evaluation
●
Support to find best acceleration (can be set at the station, only)
●
Increased placement force of Twin VHF placement head to 100 N
Additionally, the following features, options and improvements are supported from R18-2:
●
Improved placement of components with centering pins with the CPP and TH placement
heads (Pin in Paste height check)
●
Improved teaching of snap-in components
●
Stereo measurement for Gullwing and Pattern Features lead group types
●
4x image capture measurement parameter in the stereo measurement
●
Automatic illumination optimization for Non-standard and Connector component types
●
Placement of an exceptionally high component (1 use case)
●
Increased placement force for TH placement head to 30 N
Additionally, the following features, options and improvements are supported from R19-1:
●
Placement of Tall Components
●
Component Chipping Detection
A detailed description of the single features can be found in chapter 4 "Working with the OSC Fea-
tures" [}63].