3OM-1343-008_w.pdf - 第202页
5-17 AKFEDT -ID (1 1) Rate of Error (%) Each text box shows the percentage of the total number of errors per the number of picked components. (12) Shrtg. of Comp. Each text box shows the total number of component shortag…
5-16
AKFEDT-ID
(1) Feeder No.
Shown are the feeder Nos.
(2) Total Components
Each text box shows the total number of picked components (number of
pickup actions) for each individual feeders.
(3) A: comp. Missing
Each text box shows the total number of missing components detected
by the linear measure detection sensor for each individual feeders.
(4) B: comp. Missing
Each text box shows the total number of missing components detected
through recognition operation for each individual feeders.
(5) C: comp. Vertical
Each text box shows the total number of vertical component errors
detected by the linear measure detection sensor for each individual
feeders.
(6) D: comp. Recog.
Each text box shows the total number of errors detected through
recognition operation for each individual feeders.
(7) E: comp. Thick
Each text box shows the total number of errors in component thickness
detected by the linear measure detection sensor for each individual
feeders.
(8) F: pick-up Diff
Each text box shows the total number of pickup difference errors
detected in the recognition process for each individual feeders.
(9) G: comp. Posture
Each text box shows the total number of reversed component and
polarity judgment errors detected in the recognition process for each
individual feeders.
(10) Total Errors
Each text box shows the total number of errors detected in (3) through
(9).
0607-003
2.2 Handling Errors Per Feeder
5-17
AKFEDT-ID
(11) Rate of Error (%)
Each text box shows the percentage of the total number of errors per the
number of picked components.
(12) Shrtg. of Comp.
Each text box shows the total number of component shortage errors
detected for each individual feeders.
Note
When one of the above buttons is pressed, the feeder No. with the biggest
parameter under the selected button is displayed in the fi rst line and feeder
Nos. having the subsequent (second, third, fourth, ...) biggest parameters
follow.
That is, parameters are re-arranged in order of error counts, making it easy
to analyze and improve production rate.
When the [Feeder No.] button is pressed, the feeder Nos. are re-arranged
in their initial order (order of slot Nos.).
0607-003
2.2 Handling Errors Per Feeder
5-18
AKFEDT-ID
0607-003
2.3 Nozzle Management Data
2.3 Nozzle Management Data
The corresponding tab sheet enables the operator to view the nozzle
management data.
When the "Noz. Mgt. Data" tab is pressed in the "Management Data"
window, the following tab sheet appears inside the window.
Fig. 3E10 "Noz. Mgt. Data" Tab Sheet
Fig. 3E10-1 "Bypass & Rate (Chart)" Window ("Handling Errors per Nozzle" Window)
The "Noz. Mgt. Data" tab sheet is divided further into four subtab sheets and
each subtab sheet shows the nozzle management data for each individual
head #.
When a subtab is pressed, the corresponding subtab sheet appears.