00193279-03.pdf - 第19页
Retrofit / Maintenance Instructions SIPLACE HS-50 / HS-60 04/2004 US Edition 1 Retrofit / Maintenance Instructions Air filter box with more powerful fan 19 1.6 Retrofit : Switch t he placem ent machi ne off at the mai n …
Retrofit / Maintenance Instructions SIPLACE HS-50 / HS-60
1 Retrofit / Maintenance Instructions Air filter box with more powerful fan 04/2004 US Edition
18
1.5.1 Dangers due to permanent magnets
The protective covers remain closed during the retrofit and maintenance. There is thus no danger
from permanent magnets. 1
1
1.5.2 Definitions
1
PLEASE NOTE 1
1
1
1
DANGER 1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Retrofit / Maintenance Instructions SIPLACE HS-50 / HS-60
04/2004 US Edition 1 Retrofit / Maintenance Instructions Air filter box with more powerful fan
19
1.6 Retrofit
: Switch the placement machine off at the main switch.
1
Follow the correct shut-down routine. 1
1
1
: Secure the placement machine to prevent it being switched on without authorization during the
entire retrofit.
: Visually check to make sure that both fans have stopped.
1
: Loosen the fixings on the gantry cover (4 tallow-drop screws M4, size 2.5 Allen key)
: Lift the gantry cover away from the machine and place the cover on a workbench.
1
1
1
1
1
1
1
Screws
Retrofit / Maintenance Instructions SIPLACE HS-50 / HS-60
1 Retrofit / Maintenance Instructions Air filter box with more powerful fan 04/2004 US Edition
20
: Position the prepared trough of the air filter box on the removed gantry cover so that it is flush
with the edge of the gantry cover panel that runs across.
Make sure that both circular break-outs are covered by the air filter box.
1
1
1
Risk of injury on sharp edges. 1
1
: For each circular break-out use two 2 clamping elements (item no. 00358751-02) at an angle
of approx. 120° to one another, and thus clamp the trough of the air filter box onto the gantry
cover.
Circular break-out
Edge of metal panel
Clamping element