00193854-0402_AI_LBO_HS60-D4_DE+EN.pdf - 第37页

HS-60 / D4 "Lo ng Board Option" 2 Assembly Instructions "Long Board Option" SIPLACE HS-60 / D4 05/2007 Edition 37 2 : Plug the conne ctor into slot X35 on the conversion board in the a ssembly trough.…

100%1 / 50
2 Assembly Instructions "Long Board Option" SIPLACE HS-60 / D4 HS-60 / D4 "Long Board Option"
05/2007 Edition
36
: Fix the cable and hose carrier.
: Run the cables through the hole into the inside of the machine.
There, run it through the cable duct for the PCB conveyor to the conveyor conversion board or
to the Y-distributor for the air supply.
2
2
HS-60 / D4 "Long Board Option" 2 Assembly Instructions "Long Board Option" SIPLACE HS-60 / D4
05/2007 Edition
37
2
: Plug the connector into slot X35 on the conversion board in the assembly trough.
2
X 35
2 Assembly Instructions "Long Board Option" SIPLACE HS-60 / D4 HS-60 / D4 "Long Board Option"
05/2007 Edition
38
: Connect the air hose to the air distributor connector of a lifting table using the preassembled
T-piece.
2
2
Only for PCBs between 50 and 110 mm: 2
: Remove the stopper unit between the conveyor side walls.
: Disconnect the cables.
: Remove the screws from the mount for the stopper unit.
2
before
after