00196803-02_VD_SIPLACE_Pro_9.3_DE EN.pdf - 第49页
Software Version sbeschreibun g Programmiersy stem SIPLACE Pro 9.3 Software Version Description Programming Sys tem SIPLAC E Pro 9.3 49 8. T he job is sent to the stat ion after a success ful integrity and li cense c hec…
Software Versionsbeschreibung Programmiersystem SIPLACE Pro 9.3
Software Version Description Programming System SIPLACE Pro 9.3
48
As long as the feature is not activated on all stations in the line or not supported by all software
versions in the line, the recipe is sent without alternative component data, i.e., a mixed operation
within a line is not possible.
Notes
1. The feature requires the "Forced Setup Verification" operation mode. The use
of splice sensors is highly recommended, if alternative components will directly
be spliced directly.
2. The feature is activated with the "Alternative Components" license.
3. For further information on this feature and its restrictions please see the user
manual “Alternative Components“ on the product CD.
4. The SiCluster Professional option supports alternative components.
5.3.8 SIPLACE Random Setup
Up to now feeders and components have to be set up exactly on the tracks that have been calculated
by the optimization and assigned by the download.
The SIPLACE Random Setup feature offers the opportunity to set up components on another track of
the same table or even to set up another table in the line. This is only supported for X feeders. Other
feeder types must be set up on the accurate track as described in the setup.
It is not possible changing the setup for a production in process.
Procedure:
1. Create an optimized target setup using the optimization.
2. In the LineControl GUI the "Random Setup" function is enabled in the production plan.
3. A recipe or job with an optimized setup is added to the production plan.
4. Typically, the required components have already been set up on the X feeders in the pre-
setup.
5. The pre-setup-up X feeders are placed on the tables of the line. It is recommended to position
the feeders as accurate as possible with respect to the track of the optimization result.
Note
Deviations of the real setup compared with the target setup leads may lead to
deviations of real and simulated production time and thus to an unequal
utilization within the line.
6. During the download of the recipe to the line, LineControl creates a working copy of the
optimized target setup. Setup Center detects the feeders actually set-up at the station and
enters them into the working copy.
Note
The computer on which the Setup Center application is installed can be
selected in the configuration of the Line Control GUI.
7. LineControl checks if all components of the PCB(s) of the recipe are correctly entered in the
working copy of the setup according to the download settings. If components are missing, they
can be added on their standard X feeder from the optimized setup.
Software Versionsbeschreibung Programmiersystem SIPLACE Pro 9.3
Software Version Description Programming System SIPLACE Pro 9.3
49
8. The job is sent to the station after a successful integrity and license check.
Notes
The feature requires station software 705. Earlier software versions (605 or 703) were
not tested.
The features "Random Setup" and "Alternative Component" cannot be combined on
one single line.
For further information on this feature and its restrictions please see the user manual
“SIPLACE Random Setup“ on the product CD.
5.3.9 Teaching of Placement Positions
From station software 705, placement position offsets (X, Y and angle) can be taught at the station
and uploaded to SIPLACE Pro.
In the PCB editor, the placement positions to be taught have to be marked. The taught placement
position offsets are taken into account when supplying data to stations with prior software versions
(e.g. station software version 40x and 50x). A change in the placement position offsets is distributed to
other stations in the line that place the placement position of the same name.
Notes
The SIPLACE Pro user "Service" has to have writing access to placement lists.
In addition, the user logged into the station has to have writing access to the placement
list that contains the uploaded placement position.
5.3.10 Split Table at Track and SiCluster Professional
Besides optimizing split tables in SiCluster Professional it is also possible to use this option for the
cluster jobs and their Result Jobs.
5.3.11 Whispering of Barcode Information
Note
The feature can be activated with the "Whispering of Barcodes" license.
5.3.12 Long Board Option
Note
The feature can be activated with the "Long Board Option" license.
5.3.13 Integrity Check for Multiple Jobs
Similar to the Multi Job Optimization and the Multi Cluster Job Optimization there is the Multi Integrity
Check in the Optimizer toolkit. From the structure tree of the recipes the recipes to be checked are
added to a recipe list and optimized in the desired sequence and according to the settings.
At the same time, the optimization starts an adjustable number of processes and thus utilizes the
present multi core processors.
5.3.14 Query Tool
The underlined results of queries can be clicked on. The corresponding object is opened in SIPLACE
Pro Desk.
Software Versionsbeschreibung Programmiersystem SIPLACE Pro 9.3
Software Version Description Programming System SIPLACE Pro 9.3
50
5.3.15 Nozzle Report
Using the Nozzle reports, it is possible to create a documentation of a single nozzle and a list of
nozzles.
In the list of several nozzles up to ten attributes can be selected. The nozzle attributes to be shown
can be changed in the report details.
The report can be started via the context menu in the structure view.
5.3.16 Warnings as Errors
All warning messages of the Optimizer can be upgraded to an error or downgraded to a warning
again.