TR7500_Maintenance_en.pdf - 第6页
5 1 . 3 C l ea n se c o n v e y o r c i r c u l a r b e l t s l T a k e o f f t he c on v e y o r c i r c u l a r b o l t f r o m t he c o n v e y o r a n d w i p e t h e bo l t w i t h cl e an s e f a b r i c an d ne u …
4
Step4. Pull the filter cover following the direction of arrow and take the filter out
Step5. Take out the computer dust filter and use an air pump driven by compressed air to
remove dust in order to prevent the computer from overheating.
5
1.3 Cleanse conveyor circular belts
l Take off the conveyor circular bolt from the conveyor and wipe the bolt with cleanse fabric
and neutral cleanser in order to maintain the clean and the transport ability of the bolt. After
the bolt is dried, place the bolt to the conveyor.
6
1.4 Cleanse the reference side of conveyor
l Use a clean fabric to wipe the reference side of the conveyor. If it is necessary, use a clean
fabric with the cleaning naphtha to wipe the reference side of the conveyor.
1.5 Cleanse the board width adjusting ball screw and linear
guideways.
l Use a clean fabric to wipe the board width adjusting ball screw, and then use the engine oil
and a clean fabric to wipe the board width adjusting ball screw and linear guideways
keeping them form rusting.