Einsteckerlösung an BE Wagen S-F.pdf - 第27页
Special Design 2 Retrofit instructions for single plug soluti on for compo nent trolleys on S/F ma chines (item no.: 00166164-0 1) 10/2005 Edition 27 : Remove the cable tie, unscrew the cable gland and remove the cable. …
2 Retrofit instructions for single plug solution for component trolleys on S/F machines (item no.: 00166164-01) Special Design
10/2005 Edition
26
: Open the front panel of the communication interface
2
2
: Remove connectors X4do, X7do and X9do from the board.
2
Connector
Special Design 2 Retrofit instructions for single plug solution for component trolleys on S/F machines (item no.: 00166164-01)
10/2005 Edition
27
: Remove the cable tie, unscrew the cable gland and remove the cable.
2
2
2
2
2
2
2
2
2
2
2
Cable gland
2 Retrofit instructions for single plug solution for component trolleys on S/F machines (item no.: 00166164-01) Special Design
10/2005 Edition
28
2.6.2 Installation
: Fix the set of cables (00377714-xx) to the U-shaped profile using 3 cable ties so that the end
of the flexible tubing lies against the U-shaped profile.
2
This is important and MUST be done, otherwise it will not be possible to plug the connector into
the machine. 2
2
2
2
2
2
2
2
2
2
2