Einsteckerlösung an BE Wagen S-F.pdf - 第30页

2 Retrofit instructions for single plug solution for compo nent trolleys on S/F machines (item no.: 00166164-01) Special Design 10/2005 Edition 30 : Run the signal cable (0 0377716-xx) thro ugh the back panel of the ho u…

100%1 / 38
Special Design 2 Retrofit instructions for single plug solution for component trolleys on S/F machines (item no.: 00166164-01)
10/2005 Edition
29
: Guide the power cable through the hole beneath the table bed and fix the cable using the cable
gland on the transformer cover.
: Strip the brown cable that you previously cut off from the fuse (approx. 10mm).
: Connect the power cable as follows:
- Connect the brown wire and wire 1 on the power cable.
- Connect wire 2 to the transformer terminal (2).
- Connect the yellow-green wire to a PE terminal using the cable lug.
2
2
: Refit the transformer cover.
2
Make sure that no cables are damaged. 2
2
2
2
2
Protective earth wire
Brown wire and wire 1
Power cable
2 Retrofit instructions for single plug solution for component trolleys on S/F machines (item no.: 00166164-01) Special Design
10/2005 Edition
30
: Run the signal cable (00377716-xx) through the back panel of the housing and into the com-
munication interface. Fix it using the cable gland on the housing.
: Attach connectors X4 and X7.
2
Make sure that the polarisation in the connector is correct. 2
2
2
2
2
2
2
2
2
2
2
Connector X4
Connector X7
Special Design 2 Retrofit instructions for single plug solution for component trolleys on S/F machines (item no.: 00166164-01)
10/2005 Edition
31
: Fix the signal cable using a cable tie and refit the front panel using six screws.
2
Make sure that the LED (SW MN; 00328703-xx) fits into the front panel. 2
2
2
2
: Remove the table adapter from the previous air hose.
2
: Run the new air hose beside the cables so that the air hose is connected, beneath the table
bed, with the existing, shortened air hose.
: Fix the cables and the air hose beneath the table bed using a cable tie.
2
Do not overtighten the cable tie - leave a little slack. 2
2
2
LED