00195722-0102_UM_X-Serie_SR605_EN.pdf - 第32页
1 Introduction User Manual SIPLACE X-Series 1.5 Important notes on the user manual From software version SR.605.xx 07/2008 EN Edition 32 1.5.2 Danger notes WA R N I N G 1 – A thorough knowledge of the releva nt part of t…
User Manual SIPLACE X-Series 1 Introduction
From software version SR.605.xx 07/2008 EN Edition 1.4 Operator levels
31
1.4 Operator levels
The operating software is structured so that certain functions or menus can only by used or called
by appropriately trained personnel. There are three different classes of user:
– operator,
– line engineer and
– service engineer.
The operator levels "Line engineer" and "Service engineer" are protected by a password.
Operators 1
The operator class consists of any person who has been trained in operation of the machine.
These people are authorized to use any functions associated with operating the machine and may
call up any menus needed to use the machine.
Line engineers 1
Line engineers have undergone special training and are authorized to carry out line engineer ac-
tivities, such as creating set-up configurations, determining vision parameters, etc.
Service engineers 1
This class is intended for engineers from SIPLACE. They are trained to carry out servicing work
and to upgrade and retrofit the placement system.
1.5 Important notes on the user manual
1.5.1 Contents and filing of the user manual
This user manual contains basic information that must be observed when setting up, operating
and maintaining the machine. The service engineers, qualified staff, operators and users must
therefore read it before commencing installation and commissioning. The instructions must be
kept permanently accessible where the machine is used.
In addition, the user must ensure that the employees have fully understood the contents of the
user manual.
1 Introduction User Manual SIPLACE X-Series
1.5 Important notes on the user manual From software version SR.605.xx 07/2008 EN Edition
32
1.5.2 Danger notes
WARNING 1
– A thorough knowledge of the relevant part of this user manual is required before carrying out
any work on the machine.
– All work must be carried out by appropriately trained and qualified personnel.
– All warning, caution and danger notes MUST be observed.
– In addition, read through chapter 2 of the user manual carefully.
1.5.3 Liability of the manufacturer/supplier
We draw your attention to the fact that this user manual only contains descriptive and explanatory
material and does not include any contractual conditions or undertakings. All obligations of SI-
PLACE Company proceed from the conclusion of the contract concerned, under which you have
the machine described herein. This applies in particular to all statements regarding performance
or service life and the agreed liability for faults or defects. The provisions of the contract regarding
the liability for faults or defect are neither extended nor restricted by any statements in this user
manual.
1.5.4 Revision index
1
1
1.5.5 Further information about and contents of the documentation package
1.5.5.1 How to get information
If you have any further questions concerning this manual or if you would like additional information
on a particular topic, please get in touch with your local SIPLACE dealer or contact us directly at:
SIPLACE
Electronics Assembly Systems
Rupert-Mayer-Str. 44
81379 München 1
M anual Software version Edition
First edition User manual SR.605.xx 07/2008 EN
User Manual SIPLACE X-Series 1 Introduction
From software version SR.605.xx 07/2008 EN Edition 1.5 Important notes on the user manual
33
1.5.5.2 SIPLACE on the World Wide Web (WWW)
We also have our own site on the Internet. Why not log onto our SIPLACE home page at
http://www.siplace.com?
1
Fig. 1.5 - 1 The SIPLACE home page
All the menus and other information are available in two languages: You can choose between the
German and English versions.
The various headings contain information on
– our products
– services
– contacts, etc.
Registered customers can also access the SIPLACE User Group. There you can call up special
information on our placement machines, such as
– technical documentation
– technical information
– spare parts catalogs etc.