X service技术参数.pdf - 第18页
18 Placement Hea ds Nozzle Changer (TwinHead) Position of the nozzle changer on SIPLACE X3 placement machines Mag azin e fo r tw o standard nozzles Magazine for one spec ial n ozzle , gri pper NC20 / NC20 or NC12 / NC12 …
17
Placement Heads
Nozzle Changers (Collect & Place Heads)
Description
Nozzle changers increase
the flexibility of placement
heads when processing dif-
ferent components. The
nozzle configuration can be
quickly modified for new
placement jobs. Exactly
defined positions and the
perfect seating of the nozzle
in the garage guarantee
minimal radial eccentricity
at the placement head.
The nozzle changer for the
20-nozzle Collect & Place
head is equipped with a
monitoring circuit which
checks whether the nozzle
magazine is seated correctly
on the mount.
Magazine for 12
type 9xx nozzles
Magazine for 6
type 9xx nozzles
Magazine for 6
type 8xx nozzles
Nozzle changer for the
12-nozzle Collect & Place head (NC12)
(5 magazines in total
→ 60 nozzle holders)
Nozzle changer for the
6-nozzle Collect & Place head (NC6)
(6 magazines in total → 36 nozzle holders)
Nozzle changer for the
20-nozzle Collect & Place head (NC20)
(6 magazines in total
→ 72 nozzle holders)
Magazine for 12
type 10xx, 11xx or 12xx nozzles
18
Placement Heads
Nozzle Changer (TwinHead)
Position of the nozzle changer on SIPLACE X3 placement machines
Magazine for two
standard nozzles
Magazine for one
special nozzle, gripper
NC20 / NC20 or
NC12 / NC12 or
NC6 / NC6
NCTH
C&P20/C&P12/C&P6
PCB
C&P20/C&P12/C&P6
NC20 / NC20
or NC12 / NC12
or NC6 / NC6
The nozzle changer (NCTH) for the TwinHead (TH) may be
installed at the following locations on SIPLACE X machines.
The supporting plate can hold up to 12 magazines for standard
or special nozzles or grippers.
Placement machine Location 1 Location 3
X3 1 x NCTH —
X2 1 x NCTH 1 x NCTH
19
Placement Heads
Nozzle Changers
Technical Data for the Nozzle Changers
*) All 6 magazines must always be set up.
The number of nozzle changers for the Collect & Place heads depends on the number of gantries
in the placement area:
- up to four nozzle changers may be installed in the placement area with two gantries
- up to three nozzle changers may be installed in the placement area with one gantry
Nozzle changer for the 20-nozzle Collect&Place head
Dimensions (length x width x height) 449 x 94.5 x 79 mm³
Number of magazines 6 each with 12 nozzle holders
*)
Number of nozzle holders 72
Nozzle types 10xx, 11xx, 12xx
Nozzle change time < 200 ms per nozzle
Compressed air connection 0.48 MPa (4.8 bar)
Nozzle changer for the 12-nozzle Collect & Place head
Dimensions (length x width x height) 449 x 62.7 x 77.7 mm³
Number of magazines min. 1 / max. 5, each with 12 nozzle holders
Nozzle types 9 xx
Nozzle change time < 200 ms per nozzle
Compressed air connection 0.48 MPa (4.8 bar)
Nozzle changer for the 6-nozzle Collect & Place head
Dimensions (length x width x height) 448 x 122.5 x 97.7 mm³
Number of magazines min. 1 / max. 6, each with 6 nozzle holders
Nozzle types 8 xx, 9 xx
Nozzle change time < 200 ms per nozzle
Compressed air connection 0.48 MPa (4.8 bar)
Nozzle changers for the SIPLACE TwinHead
Dimensions (length x width x height) 448 x 68.5 x 49 mm³
Number of magazines max. 12
Number of nozzle holders May be freely configured
Nozzle types 4 xx with adapter
5 xx (standard)
9 xx with adapter
Special nozzle, gripper
Nozzle change time < 2 s per nozzle