QP341 351E规格书.pdf - 第3页
6.1.10 Area Sensor (Optional) .........................................................................................16 6.1.11 Side Covers (Optional) ....................................................................…
Contents
1. Introduction .........................................................................................................1
1.1 Machine Outline....................................................................................................................1
1.2 Features................................................................................................................................1
2. Machine Data and Structure...............................................................................2
2.1 Machine Data and Operating Environment...........................................................................2
2.2 Machine Structure.................................................................................................................3
2.2.1 Overview.................................................................................................................3
2.2.2 Placing Head...........................................................................................................3
3. Machine Specifications.......................................................................................4
3.1 Performance Specifications..................................................................................................4
3.2 PCB Conveyance .................................................................................................................5
3.3 PCBs.....................................................................................................................................5
4. Machine Configuration .......................................................................................6
4.1 Machine Configuration Selection..........................................................................................6
4.2 Machine Configuration Examples.........................................................................................7
5. Feeder, Camera, and Nozzle Station Selection.................................................8
5.1 Feeder Table ........................................................................................................................8
5.2 Camera Type Combinations.................................................................................................9
5.3 Nozzle Station (Optional)....................................................................................................10
6. Parts Supply Units.............................................................................................11
6.1 Supply Units........................................................................................................................11
6.1.1 Multi-Feeder Unit (MFU-6) (Optional) ...................................................................11
6.1.2 Power Feeder Unit (PFU) (Optional).....................................................................12
6.1.3 Multi-Tray Unit (MTU-8E and MTU-9E) (Optional)................................................13
6.1.4 Nozzles (Optional) ................................................................................................14
6.1.5 Special Nozzles and Mechanical Chucks (Optional) ............................................14
6.1.6 Single Tray Unit (STU-1/2) (Optional) (Under Development)................................15
6.1.7 Reject Parts Conveyor (Optional) .........................................................................15
6.1.8 Automatic Tape Cutter (Optional) .........................................................................16
6.1.9 Tray Removal Confirmation (MTU-9E) (Optional).................................................16
– i – QP-341E-MM/QP-351-MM Specifications
Preliminary (January 10, 2000)
6.1.10 Area Sensor (Optional) .........................................................................................16
6.1.11 Side Covers (Optional).........................................................................................16
6.1.12 Smoke Colored Acryl Covers (Optional)...............................................................16
6.1.13 Lead Coplanarity Check (Optional) (Under Development)....................................17
6.1.14 Placing Pressure Control (Optional) (Under Development)..................................17
6.1.15 Parts Confirmation Sensor (Optional) (Under Development)................................17
6.1.16 Insertion Control Placing (Pending) (Optional)......................................................17
6.1.17 Vacuum Back-up Pins (Optional)..........................................................................17
6.1.18 Rear Operation Panel (Optional) ..........................................................................18
6.1.19 Mechanical Feeders (Optional).............................................................................18
6.1.20 Stick Feeders (Optional) .......................................................................................19
6.1.21 Feeder Stand (Optional) .......................................................................................21
6.1.22 Feeder Set-up Jig (Optional).................................................................................22
6.1.23 Tape Splicer for Power Feeders (Optional)...........................................................22
6.1.24 Roller Conveyor (Optional)....................................................................................23
6.1.25 Handy Terminal (Pending) (Optional) ...................................................................23
6.1.26 Kitting Station (Pending) (Optional) ......................................................................23
6.1.27 HELPS (Pending) (Optional).................................................................................23
6.1.28 Other.....................................................................................................................23
7. Machine Control System ..................................................................................24
7.1 Machine Control Specifications ..........................................................................................24
8. Machine Drawings.............................................................................................25
8.1 Dimensions.........................................................................................................................25
8.1.1 QP-341E-MM (MF + MFU-6E)..............................................................................25
8.1.2 QP-341E-MM (PF + PFU-3E)...............................................................................26
8.1.3 QP-351E-MM (MFU-6E + MFU-6E)......................................................................27
8.1.4 QP-351E-MM (PFU-3E + PFU-3E).......................................................................28
8.2 Location of the Leveling Bolts (QP-341E-MM) ...................................................................29
Notes: The official model name of this machine is QP-341E-MM and QP-351E-MM. This name
should always be used on the associated documentation when shipping a unit or units of this
model to a third country.
Since this equipment contains strategic materials that are covered by international treaty, it is
necessary to obtain government permission to export it to a third country.
Abbreviated versions of the official model name may appear in this and other related documents.
– ii – QP-341E-MM/QP-351-MM Specifications
Preliminary (January 10, 2000)
1. Introduction
1.1 Machine Outline
The QP-341E/351E is a limited footprint multi-function high-precision SMD mounter.
The machine is ideally suited for positioning after a high-speed chip shooter as a fine
pitch mounter, or used in a multiunit, multipurpose line for placing anything from odd-
form components to flip chips.
The machine occupies a minimum of floorspace, with the width of the QP-341E withheld
to 835 mm (or 916 mm for the QP-351E), and a conveyor length of 837 mm
(918 mm for the QP-351E).
The machine employs a triple-shafted placing head, with independent rotational and
vertical movement for each of the attached nozzles.
IP series mechanical feeders and power feeders can be loaded.
1.2 Features
• QP-341E/351E can be used for small or large scale production because of its
compactness and excellent line configurability.
• Configure the production line to suit your throughput requirements, and the kind of
parts to be placed.
• Expand your supported part range using Fuji's two-camera system.
• Slim frame occupies the minimum of floorspace.
• Placing accuracy of ±0.066 mm (3σ) for regular parts, and ±0.03 mm (3σ) for parts
such as QFPs with leads on all four sides.
• Supports the same Power Feeders used with the QP-132E and the NP-133E, in
addition to mechanical feeders (also compatible with the QP-242E and IP-3).
• Supports the handling of large boards of up to 457 x 508 mm. The PFU-3E or the
MFU-6E can be attached/detached on both the front and rear side of the machine
enabling easy maintenance and changeover.
– 1 – QP-341E-MM/QP-351-MM Specifications
Preliminary (January 10, 2000)