TM2243_Explanation Document of DualLane MachineYS24(DL)YS24X(DL).pdf - 第5页

MDOC - SOFT50073 5 2. Li m i t a t i o ns • Follow i n g functions are not available in v e rsio n “V 3 .21S TD R1.000”. – MIS data for ea ch board – C MU report and CMU command – 3 A Pro cess Control( Option ) – Au t om…

MDOC

SOFT50073

• About the Board Data

– The following board data format is available at Dual Lane System.

– Combined Board Data (Combined YGX)

• This board data is used when production is performed in both lanes.

• It is the board data format that summarized two board data in one file.

• It can be made only in Y.FacT, and it is impossible to create new board

data at the machine.

– Single Board Data ( such as YGX and VIOS )

• The conventional format of the board data is available.

• This format is used in the case of the production is executed only in

one lane. On the occasion of use, it is necessary to appoint the lane to

start production (later description).

• When this board format is used, the one side lane becomes unused,

and the transfer signal or the board transfer does not work.

1. Summary

MDOC

SOFT50073

2. Limitations

• Following functions are not available in version

“V3.21STD R1.000”.

– MIS data for each board

– CMU report and CMU command

– 3A Process Control( Option )

– Automatic Program Change-Over (Option)

MDOC

SOFT50073

3. The detail of each screen

• In this chapter, the differences of each screen from the

conventional single lane machine is explained.