00198609-01_AI_Replacing_the_X_and_Y_Trailing_Cable_EbS_EN.pdf - 第21页

在线预览 00198609-01_AI_Replacing_the_X_and_Y_Trailing_Cable_EbS_EN.pdf PDF 文档。

3 Replacing the Y trailing cable vacuum assembly



20 Assembly Instructions E by SIPLACE Replacing the X and Y Trailing Cable 04/2018

► Unplug all pneumatic connections to the gantry.

► Unplug all electrical connections from the trailing cable to the X and Y trailing cable interface.

► Unplug all pneumatic connections to the valve joint.

► Unplug the electrical connections to the trailing cable interface.

Fig.16: Bracket on top of trailing cable

► Loosen the two screws and nuts

fastening the trailing cable chain to the

gantry. These screws (hexagonal bolts

[03023606-xx]) must be resealed with

Loctite 241 when fitted again.

Fig.17: Removing trailing cable

► Loosen the four screws fastening the

bracket (1) on the top of trailing cable.

► Remove the trailing cable from the

machine.

Installation

► Follow the removal instructions in reverse order for installation. Also observe the following

instructions:

CAUTION

Installation instructions

Fix the screws fastening the trailing cable chain to the gantry and to the cover with Loctite

241.

Item no.: 00198609-01 ASM Assembly Systems Singapore Pte Ltd

535 Yishun Industrial Park A

ASM Tech-Park Building 2

Singapore 768775