Nordson-EFD-7017705-Component-Selection-Guide-Brochure.pdf - 第36页

www.nordsonefd.com info@nordsonefd.com 800-556-3484 Sales and service of Nordson EFD dispensing systems are available worldwide. www.nordsonefd.com info@nordsonefd.com 800-556-3484 Sales and service of Nordson EFD dispensing systems are available worldwide.

34

Ordering

Our disposable dispensing components are supplied pre-counted in boxes.

If you want 50 pieces of our 0.5" 21 gauge General Purpose tip, you would order: (1) 7018233.

Note: If you ordered (50) 7018233, you would receive 2,500 pieces.

Examples:

(1) 7366040 is 100 pieces each of our 10cc clear barrel and piston.

(1) 7018100 is 50 pieces of our 16 gauge tapered tip.

www.nordsonefd.com info@nordsonefd.com 800-556-3484 Sales and service of Nordson EFD dispensing systems are available worldwide.

Quality Assurance Statement

It is hereby certified that the materials, parts or assemblies supplied by EFD have been

inspected, tested, and manufactured in a silicone-free facility to meet all EFD quality

assurance requirements and are shipped free of manufacturing defects.

EFD components are designed for safe operation under industrial environments, when

used in accordance with our technical data, manuals, and brochures. Quality made by

Nordson EFD in the USA.

35

Ordering and Quality Assurance

Ferran Ayala

Vice President

www.nordsonefd.com info@nordsonefd.com 800-556-3484 Sales and service of Nordson EFD dispensing systems are available worldwide. www.nordsonefd.com info@nordsonefd.com 800-556-3484 Sales and service of Nordson EFD dispensing systems are available worldwide.

IMPORTANT SAFETY INFORMATION

All EFD disposable components, including syringe barrels, cartridges,

pistons, tip caps, end caps, and dispense tips, are precision engineered

for one-time use. Attempting to clean and re-use components will

compromise dispensing accuracy and may increase the risk of personal

injury.

Always wear appropriate protective equipment and clothing suitable

for your dispensing application.

Do not exceed maximum operating pressure of 7.0 bar (100 psi).

Do not heat syringe barrels or cartridges to a temperature greater than

100°F (38°C).

Dispose of components according to local regulations after one-time use.

Do not clean components with strong solvents (e.g. MEK, Acetone, THF).

Cartridge retainer systems and barrel loaders should be cleaned with mild

detergents only.

To prevent fluid waste, use EFD SmoothFlow pistons.

For Nordson EFD sales and service in over 40 countries,

contact Nordson EFD or go to www.nordsonefd.com.

Global

800-556-3484; +1-401-431-7000

info@nordsonefd.com

Europe

00800 7001 7001

infoefd.europe@nordsonefd.com

Asia

China: +86 (21) 3866 9006; china@nordsonefd.com

India: +91 80 4021 3600; india@nordsonefd.com

Japan: +81 3 5762 2760; japan@nordsonefd.com

Korea: +82-31-736-8321; korea@nordsonefd.com

SEAsia: +65 6796 9522; sin-mal@nordsonefd.com