OM-1076-001.pdf - 第139页

0107-001 3-B Tg0502-PM-CL

Section 3

Naming Standards of Component Library

0107-001 3-A Tg0502-PM-CL

This section describes how to understand component IDs

based on the naming standards of the component library.

0107-001 3-B Tg0502-PM-CL

1. Naming Standards of Component Library

• A component ID name consists of up to 32 characters.

• Component IDs are allocated to the provided standard component

library data based on the naming standards in "3. Naming Standards

of Standard Component Library".

• Before creating new component library data, refer to "2. Naming Stan-

dards of User Component Library" and allocate component IDs to

the data.

Note that a lot of component IDs will be required in the future.

It is advisable that a basic rule such as a rule described in "3. Naming

Standards of Standard Component Library" should be established and

component IDs should be determined based on the rule.

2. Naming Standards of User Component Library

Before creating a user component library, follow the criteria below to

determine component IDs.

Number of Characters : 1 to 32 characters

Alphanumerics : A to Z, a to z, and 0 to 9

Marks : Any marks on the keyboard can be used,

excluding the followings.

['] [:] [*] [,] [?]

(a) No blank can be set between characters.

(b) No blank can be set before and after a component ID (a string of

characters).

3. Naming Standards of Standard Component Library

The provided standard component library data is broadly classified into

two types - General Components (ICs excluded) and ICs.

Component IDs are determined based on the standards described on

the subsequent pages.

1. Naming Standards of Component Library

0107-001 3-1 Tg0502-PM-CL