OM-1076-001.pdf - 第140页

1. Naming Standards of Component Library • A component ID name consists of up to 32 characters. • Component IDs are allocated to the provided standard component library data based on the naming standards in "3. Nami…

0107-001 3-B Tg0502-PM-CL

1. Naming Standards of Component Library

• A component ID name consists of up to 32 characters.

• Component IDs are allocated to the provided standard component

library data based on the naming standards in "3. Naming Standards

of Standard Component Library".

• Before creating new component library data, refer to "2. Naming Stan-

dards of User Component Library" and allocate component IDs to

the data.

Note that a lot of component IDs will be required in the future.

It is advisable that a basic rule such as a rule described in "3. Naming

Standards of Standard Component Library" should be established and

component IDs should be determined based on the rule.

2. Naming Standards of User Component Library

Before creating a user component library, follow the criteria below to

determine component IDs.

Number of Characters : 1 to 32 characters

Alphanumerics : A to Z, a to z, and 0 to 9

Marks : Any marks on the keyboard can be used,

excluding the followings.

['] [:] [*] [,] [?]

(a) No blank can be set between characters.

(b) No blank can be set before and after a component ID (a string of

characters).

3. Naming Standards of Standard Component Library

The provided standard component library data is broadly classified into

two types - General Components (ICs excluded) and ICs.

Component IDs are determined based on the standards described on

the subsequent pages.

1. Naming Standards of Component Library

0107-001 3-1 Tg0502-PM-CL

3.1 General Components (ICs excluded)

3.1.1 Component Name, Component Size, Component Thick-

ness, Manufacturer's Model No. and No. of Leads

The characters from the first to the eighth show the component name,

component size, component thickness, manufacturer's model No. and

number of leads.

The first character should be an English letter (A to Z).

(1) Component Name (Abbreviation for Component Name)

Each component name is expressed using its specified compo-

nent abbreviation.

Example: "C1608T08---"

Capacitor of 1.6 × 0.8 mm in Size and 0.8 mm in Thick-

ness

3.1 General Components (ICs excluded)

0206-003 3-2 Tg0502-PM-CL

Component ID:

13121110987654321 15 16

3.1.1 Component Name, Component

Size, Component Thickness,

Manufacturer's Model No. and

No. of Leads

3.1.2 Serial No.

3.1.3 Abbreviated Name of

Component Makers

Fig. C1

3.1.4 Taping

Specifications