00197835-04_JC_PM_WF3_SX12_EN.pdf - 第36页
10 WF3 SX1/2 Clean and preserve the conveyor, lifting tables and gantry cables. 2.5 min 2 / 2 C A U T I O N ! R e f e r t o s a f e t y i n s t r u c t i o n s i n u s e r m a n u a l b e f o r e c o m m e n c i n g M …
10 WF3 SX1/2 Clean and preserve the conveyor, lifting tables and gantry cables. 2.5 min 1 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Transport Empty
NOTICE! ESD guidelines are to be followed Tool:
T1
Wear Part: Consumables:
C3, C4, C5, C9, C31
www.asm-smt.com
1 Remove all loose components on and
around the whole PCB conveyor.
2 Clean the gantry cables of the Y-Axis. 3 Clean the gantry cables of the X-Axis.
4 Repeat all steps at the other gantry. 5 Apply teflon oil to a lint free cloth. 6 Preserve all hexagon shafts.
10 WF3 SX1/2 Clean and preserve the conveyor, lifting tables and gantry cables. 2.5 min 2 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Transport Empty
NOTICE! ESD guidelines are to be followed Tool:
T1
Wear Part: Consumables:
C3, C4, C5, C9, C31
www.asm-smt.com
7 Preserve all linear guide rails. 8 Preserve all ball screws. 9 Clean all side clamping surfaces.
11 WF3 SX1/2 Clean / replace the head exhaust air filter. 5 min 1 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Transport Empty
NOTICE! ESD guidelines are to be followed Tool:
T31
Wear Part:
W21
Consumables:
C19
www.asm-smt.com
1 Loosen the screw. 2 Take out the filter. 3 Blast the dirt out.
4 Check the filter for contamination. 5 If OK proceed with step 7. 6 If not OK replace the filter with a new one.