00197835-04_JC_PM_WF3_SX12_EN.pdf - 第53页
16 WF3 SX1/2 Check the guide roller and buffer at the protection covers. 1 min 1 / 2 C A U T I O N ! R e f e r t o s a f e t y i n s t r u c t i o n s i n u s e r m a n u a l b e f o r e c o m m e n c i n g M a i n t e…
www.asm-smt.com
16 WF3 SX1/2 Check the guide roller and buffer at the protection covers. 1 min 1 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Transport Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part: Consumables:
www.asm-smt.com
1 Move the cover until the roller is in the
corner.
2 Check the guide roller for damages. 3 If O-ring missing (1) or damaged (2) in-
form service.
4 Close the cover. 5 Check if the roller touches the lower stop. 6 If YES inform service.
16 WF3 SX1/2 Check the guide roller and buffer at the protection covers. 1 min 2 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Transport Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part: Consumables:
www.asm-smt.com
7 If NOT, continue with next step. 8 Repeat all steps at the other roller of the
cover.
9 Repeat the procedure at the other cover.