00197382-01_IM_SetupCenter6.0_EN.pdf - 第34页
Installation Hardware Installation 4.2.4 Motorola MC70/MC75 1D/2D barcode sca nner 34 Installation Manual SIPLACE Setup Center 6.0 ► Make s ure that th e scanner is plac ed in the basic station and c onnected to Setup Ce…
Installation
4.2.4 Motorola MC70/MC75 1D/2D barcode scanner Hardware Installation
Installation Manual SIPLACE Setup Center 6.0 33
4.2.4.4
4.2.4.4 Setup Center Client Installation
Setup Center Client Installation
The installation for Setup Center – MobileScanner is located in the directory "\MobileScanner\MC70\" of
the CD. Execute the file "TransferToPDA.exe" to start the installation.
► Place the scanner in its cradle if this has not already been done. The installation program automat-
ically detects the scanner type (Device type) and lists the necessary software packages for the in-
stallation.
► Click on Install to start the installation of the software packages.
► Select "Continue" to proceed with the installation.
NOTICE
In case of an upgrade installation exit the Setup Center Client before you start with the instal-
lation procedure.
► Exit Setup Center Client with "File → Exit".
► Confirm any upcoming message which refers to an upgrade installation with "Yes" or "OK".
NOTICE
The installation program checks if the firmware version of the scanner complies with the mini-
mum requirement. If this is not the case, update your scanner firmware first.
Installation
Hardware Installation 4.2.4 Motorola MC70/MC75 1D/2D barcode scanner
34 Installation Manual SIPLACE Setup Center 6.0
► Make sure that the scanner is placed in the basic station and connected to Setup Center.
► Select "OK" start the transfer of the software components to the scanner.
► In case of a upgrade installation confirm the upgrade of SSC Mobile Scanner with "Yes".
The transfer of the components to the scanner is beginning.
► After completion of the data transfer to the device click on "OK" to close the window.
Installation
4.2.4 Motorola MC70/MC75 1D/2D barcode scanner Hardware Installation
Installation Manual SIPLACE Setup Center 6.0 35
The installation of MC70 Setup Center Client is beginning.
► In case of a upgrade installation confirm the update of Setup Center Client with "OK".
► Select "OK" to close the window. The installation is now completed. Please restart the device by
holding down the power key 5 seconds. After restart the Setup Center Client starts automatically and
you can start with the configuration of Setup Center and Client Software.