3OM-1011-001.pdf - 第48页
2. Error Messages 0305-001 2-3 Tg0859-PM-ER 2. Error Messages T able 3B1
A : Shows an ERROR message.
B : Shows the ERROR description.
C : Indicates the Cause and Remedy of Error
(There are some errors for which the indication may not be displayed).
D : Shows an error code consisting of 6 digits
E : Press the [NEXT PAGE] key to open the next page. Pressing the [PREV.
PAGE] key opens the previous page.
F : When several errors are displayed, the displayed page No. and the number
of errors appear at the upper right corner of the display.
G : This key is used to stop buzzer sound.
Ref.: When the [RESET] button on the operation panel is pressed, buzzer
sound stops and the display before an error has occurred resumes.
H : The displayed 4 digits represents a code which clarifies the error spot in
the software and is used only by a service personnel. Or, 8 digits will
appear, representing a recognition error code.
Refer to “3. Trouble Shooting after Error Display of Section 2” for details.
Remedial Procedure after Error Display
(1) Press the [CLEAR ALARM] key. (Fig. 3B2)
The buzzer stops sounding.
(2) Check the contents of the error message and the remedial procedure dis-
played on the operation monitor.
(3) Remove the cause of error.
(4) Press the [RESET] key to resume the original display.
0305-001 2-2
Tg0859-PM-ER
1. ERROR Display
2. Error Messages
0305-001 2-3 Tg0859-PM-ER
2. Error Messages
Table 3B1
0305-001 2-4 Tg0859-PM-ER
2. Error Messages
Table 3B2