00195066-0102-MM-VEN_DE_EN.pdf - 第14页
2 Maintenance manual Greasing plungers w ith tool Greasing plungers 05/2006 Edition 14 2.3 Use : After cleanin g plunger , then cetainly hold it by fingers and straight insert into the cylinder . 2 When insert the plunge…
Greasing plungers 2 Maintenance manual Greasing plungers with tool
05/2006 Edition
13
Situation after filling ISOFLEX TOPAS NCA 52 in the cylinder: 2
ISOFLEX TOPAS NCA 52
2
2
: Detach adapter from TOPAS tube, then pull out air from the TOPAS tube and twist set it to the
cylinder.
2
2
2
2
2
2
2 Maintenance manual Greasing plungers with tool Greasing plungers
05/2006 Edition
14
2.3 Use
: After cleaning plunger, then cetainly hold it by fingers and straight insert into the cylinder.
2
When insert the plunger, the tool spring will be strong. So please support plunger side by fingers.2
If the support is not certainly, the insertion will
be not smooth and sometimes has possibility to
break the plunger. 2
Support by finger
Support by finger
2
2
2
2
2
2
2
2
2
2
2
2
Greasing plungers 2 Maintenance manual Greasing plungers with tool
05/2006 Edition
15
: One time insert until end of stroke, then 4 or 5 times push and pull with 10 to 15 mm stroke.
2
Pay attention to have enough grease in the toolt! 2
2
2
2
: After take out the plunger, then confirm of the greasing situation of out side O ring surface.
Judgment point:
Shine surface of the O ring by TOPAS is OK.
2