00195066-0102-MM-VEN_DE_EN.pdf - 第15页
Greasing plungers 2 Maintenance manual Greasing plung ers with tool 05/2006 Edition 15 : One time in sert until end of stroke , then 4 or 5 times push and pull with 10 to 15 mm stroke. 2 Pay attention to have enough grea…
2 Maintenance manual Greasing plungers with tool Greasing plungers
05/2006 Edition
14
2.3 Use
: After cleaning plunger, then cetainly hold it by fingers and straight insert into the cylinder.
2
When insert the plunger, the tool spring will be strong. So please support plunger side by fingers.2
If the support is not certainly, the insertion will
be not smooth and sometimes has possibility to
break the plunger. 2
Support by finger
Support by finger
2
2
2
2
2
2
2
2
2
2
2
2
Greasing plungers 2 Maintenance manual Greasing plungers with tool
05/2006 Edition
15
: One time insert until end of stroke, then 4 or 5 times push and pull with 10 to 15 mm stroke.
2
Pay attention to have enough grease in the toolt! 2
2
2
2
: After take out the plunger, then confirm of the greasing situation of out side O ring surface.
Judgment point:
Shine surface of the O ring by TOPAS is OK.
2
2 Maintenance manual Greasing plungers with tool Greasing plungers
05/2006 Edition
16
2
2
2