00198051-02_IM_SetupCenter_8.1_EN.pdf - 第60页
Barcode-Scanner Installation Motorola Scanner 6.3.1 System Requirements 60 Installation Manual SIPLACE Setup Center 8.1 ► Click Clos e . 6.3 6 . 3 M o t o r o la S c a n n e r Motorola Scanner 6.3.1 6 . 3 . 1 S y s t e m…
Barcode-Scanner Installation
6.2.6 Installation of the USB-COM driver Datalogic Scanner
Installation Manual SIPLACE Setup Center 8.1 59
Step 3
► The Select Installation Folder dialog box prompts you to enter the name of the folder in which the
software should be installed. The system suggests a default destination folder for you.
► However, you can click the Browse button to open a dialog box in which you can enter or select the
path you want to use. If the folder you specify does not exist, it is created after having accepted a
confirmation dialog.
► Select the option Everyone.
► Click Next.
Step 4
► Click Next.
Step 5
► Read the license agreement relating to use of this software and select I Agree to accept the license
agreement.
► Click Next.
Step 6
► The installation of the driver software starts.
► The "Installation Complete" window appears if the installation has been completed successfully.
Barcode-Scanner Installation
Motorola Scanner 6.3.1 System Requirements
60 Installation Manual SIPLACE Setup Center 8.1
► Click Close.
6.3
6.3 Motorola Scanner
Motorola Scanner
6.3.1
6.3.1 System Requirements
System Requirements
The following components are required for the operation of the scanner:
▪ WLAN-infrastructure (not included)
▪ Motorola scanner integrated in WLAN-infrastructure and accessible with "ping" windows-command.
▪ Required scanner firmware versions
– MC67: 03.46
– MC70: 05.43
– MC75: 02.37
– MC3090: 01.13
– MC3190: 03.26
6.3.2
6.3.2 Configurate WLAN on Scanner
Configurate WLAN on Scanner
Please configure the barcode scanner for the operation within WLAN network - as described in docu
-
ment Installation Manual WLAN Infrastructure for SIPLACE (item no. 00195606-xx).
6.3.3
6.3.3 Mobile Scanner Prerequisites Setup
Mobile Scanner Prerequisites Setup
The installation for mobile scanner prerequisites setup is located on the DVD "SIPLACE Support Media
DVD1" in the Selective Installation section.
NOTICE
The scanner might be delivered with a different firmware version. Please install the firmware
version listed above. It is located on the software DVD "SIPLACE Support Media DVD1” in the
section “SIPLACE Products” (See "6.3.3 Mobile Scanner Prerequisites Setup" [➙60]). Please
observe by all means the enclosed documentation.
NOTICE
Mobile scanner menus in Chinese
If you want the menus on the Motorola scanner to appear in Chinese, you first need to install a
localized (Simplified Chinese) operating system.
Barcode-Scanner Installation
6.3.3 Mobile Scanner Prerequisites Setup Motorola Scanner
Installation Manual SIPLACE Setup Center 8.1 61
► Open SIPLACE Products (1).
► Execute the Mobile Scanner Prerequisites (1) setup.
6.3.3.1
6.3.3.1 Step 1: Mobile Device Center
Step 1: Mobile Device Center
The Mobile Scanner Prerequisites Setup checks if the necessary communication program (Mobile De
-
vice Center) is present.
If Windows Mobile Device Center is not installed on the system, the following message box appears.
► Select “Yes” to start the installation of Mobile Device Center. Make sure that the scanner is not yet
connected to the basic station.
If Windows Mobile Device Center is not installed on the system, the installation of Mobile Device Center
will be executed. Make sure that the scanner is not yet connected to the basic station.