00198051-02_IM_SetupCenter_8.1_EN.pdf - 第78页
Docking Station Installation Data Connection with PC-CAN Card 7.3.3 Installing the CAN Bus dr iver and API 78 Installation Manual SIPLACE Setup Center 8.1 Connection Example 2 1. Docking Station X or SX Connection Exampl…
Docking Station Installation
7.3.2 Connection Examples with PC-CAN Card Data Connection with PC-CAN Card
Installation Manual SIPLACE Setup Center 8.1 77
7.3.2
7.3.2 Connection Examples with PC-CAN Card
Connection Examples with PC-CAN Card
Connection Example 1
1. Docking Station X or SX
NOTICE
The first and the last terminating resistor must always be switched ON and the other switched
OFF independent of the number of docking stations.
NOTICE
The integrated terminal resistor can be connected and simultaneously connects / disconnects
the outgoing bus cable when deactivating / activating. This allows an easy start up of the bus
system one segment at a time.
Docking Station Installation
Data Connection with PC-CAN Card 7.3.3 Installing the CAN Bus driver and API
78 Installation Manual SIPLACE Setup Center 8.1
Connection Example 2
1. Docking Station X or SX
Connection Example 1 and 2
7.3.3
7.3.3 Installing the CAN Bus driver and API
Installing the CAN Bus driver and API
► Open the folder \3rdparty installer\Sontheim\CAN-Bus Driver\7.4.14.0 and select the application Set
-
up.exe on the Setup Center installation CD.
NOTICE
The integrated terminal resistor can be connected and simultaneously connects / disconnects
the outgoing bus cable when deactivating / activating. This allows an easy start up of the bus
system one segment at a time.
Docking Station Installation
7.3.3 Installing the CAN Bus driver and API Data Connection with PC-CAN Card
Installation Manual SIPLACE Setup Center 8.1 79
Step 1
► Select the language you want.
► Click OK.
Step 2
► Actually there is nothing to select / de-select, all listed features are mandatory.
► Click Install.
Step 3
The installation package will be extracted.