00198156-01_AI_Long-Board-Option_EN.pdf - 第26页
Installing SIRIO Station Software setting 2.1.2 Installation 26 Assembly Instructions E by SIPLACE 2.2 2 . 2 S I R I O S t a t io n S o f t w a r e s e t t in g SIRIO Station Software setting ► Start up the machine and p…
Installing
2.1.2 Installation Installing the LBO E Kit
Assembly Instructions E by SIPLACE 25
Reverse flow (Left Fix) → (Multi line connections)
► When connecting cables to the TSP, make sure that the label on the cable matches the label on the
connector on the TSP.
► Make sure that the add-on cables are laid down following the original cable routing, inserted into the
original braided sleeve, and fixed using cable ties.
Installing
SIRIO Station Software setting 2.1.2 Installation
26 Assembly Instructions E by SIPLACE
2.2
2.2 SIRIO Station Software setting
SIRIO Station Software setting
► Start up the machine and perform a reference run.
► In the station software, select Conveyor configuration.
The following entries are displayed:
▪ Long board stopper placement section 1: Installed (Auto detect)
▪ Thick board conveyor: Installed (Auto detect)
▪ Reverse stopper present: Installed (Auto detect)
▪ For Extended conveyor: Installed (Has to be selected manually)
Installing
2.1.2 Installation SIRIO Station Software setting
Assembly Instructions E by SIPLACE 27
► Go to the single calibration settings. Select the conveyor function 1.
► Select Save the machine data for conveyor.