00198238-01_VD_SIPLACE_Pro_14.0_R16-2_DE_EN.pdf - 第12页
SIPLACE Pro 14.0 (R 16 - 2) / V ersion Description 12/2016 Edition 12 3.2 Supported Fee der Types The following f eeders are supported by SIPLACE Pro: – 4 mm – 104 mm X - feeder – 2x8 mm X - feeder – 16 mm XN - feeder – …
SIPLACE Pro 14.0 (R16-2) / Version Description 12/2016 Edition
11
605 D-series: D1, D2, D3
*)
, D4
X-series: X2
*)
, X3
*)
, X4
*)
505 S23HM
*)
, S25HM
*)
, S27HM
*)
, HS50
*)
, HS60
*)
,
HF
*)
, HF/3
*)
408/101 CS
*)
, CF
*)
407 S20
*)
, F4
*)
, F5
*)
, S23
*)
, F5HM
*)
Table 3-1: Supported station software versions and machine types
*)
discontinued
SIPLACE Pro 14.0 (R16-2) / Version Description 12/2016 Edition
12
3.2 Supported Feeder Types
The following feeders are supported by SIPLACE Pro:
– 4 mm – 104 mm X-feeder
– 2x8 mm X-feeder
– 16 mm XN-feeder
– Surftape AX (8 mm, 12 mm, 16 mm)
– LED feeder TE
LED feeder HS
– SIPLACE Glue Feeder
– SIPLACE JTF-S (X-series S and SX1/SX2 V2 only)
– SIPLACE JTF-M (X-series S, X4i S micron and SX1/SX2 V2 only)
– SIPLACE JTF-ML 14X and JTF-ML 18X (TX-series only)
– SIPLACE BulkFeeder X
– Arbitrary Carrier X
– Conveyor Carrier X
– Carrier X (XTH) (X2, X3, X4 on location 2 and 4 only)
– Carrier SX (SX1/SX2 with Twin Head and CPP head only)
– FFI feeders:
Data IO RoadRunners
– IPTE Multi Stick Feeder:
IPTE MSF 60 AX
IPTE MSF XL80 AX
– Stick feeder with X-adapter
– Label feeder with X-adapter
– Reject conveyor with X-adapter
– Dip module for X-tables (LDU_X)
– MTC2 (X2, X3, X4 on location 2 and 4, X2 S, X3 S, X4 S on location 2)
– WPC5 / WPC6 (SX1/SX2, X-series S on location 2)
– SIPLACE Wafer Systems (CA-series only)
– Splice sensor X-feeder
SIPLACE Pro 14.0 (R16-2) / Version Description 12/2016 Edition
13
4 Features of SIPLACE Pro 14.0
If not differently described, the features of the previous SIPLACE Pro versions are contained in
SIPLACE Pro 14.0. The main features of SIPLACE Pro 14.0 are listed below.
NOTICE
Detailed information on the individual functions can be found in the Online Help for
SIPLACE Pro.
4.1 SIPLACE TX micron – New Placement Machine
The new SIPLACE TX micron placement machine supports high precision placement on a dual
lane conveyor system. The placement machine exists in two variants: TX2 micron and TX2i
micron. The C&P20 M2 and CPP placement heads and the SIPLACE JTF-ML feeder are
supported. A special vacuum tooling is optionally used to meet the highest accuracy requirements.
A new measuring procedure offers features to increase the accuracy and make the placement
results long time stable. Different precisions are supported.
The desired precision has to be specified for the component shape in SIPLACE Pro. In the
Component Shape Editor, the user has to enable the High entry in the Placement Accuracy field
and enter or select a value in [µm] to specify the required accuracy. The dispersion is fixed to 3 σ
and cannot be changed.
If an accuracy < 20 µm has been specified, the Micron 15u3Sigma – Machine Connection license
is required at the station.
4.2 Shuttle Extension for SIPLACE TX-Series
To reach the best possible output, shuttles might be required in the SIPLACE line, e.g. when
I-Placement mode is used. For this, the new Shuttle Extension has been introduced for the
SIPLACE TX-series. One machine can have up to two shuttle extensions attached – one input
shuttle and one output shuttle.
The shuttle extension itself and its lane settings has to be configured in the Stations of Line tab of
the Line Editor.
Figure 4-1: Line Editor – Stations of Line tab
For the input shuttle it can be configured where the rails of the shuttle extension should align with
the previous machine. This is done by editing the fixed rail orientation (left / right) and the position
of the fixed rail for each lane. Only fixed rail settings left or right of each lane are supported.