00196771-02_IM_SSW_705_04_DE_EN.pdf - 第24页

Station Software 705.04 / Installation Manual Ausgabe 07/2011 Edition 5 Installing the machine computer 5.1 Installation sequence See separate Installation Manuals for d etails on installing the Windows XP or Windows XP …

Station Software 705.04 / Installation Manual Ausgabe 07/2011 Edition

4.3 Network configuration

Figure 4-5: Network connections between the machine and SIPLACE Pro

In two-computer operation a separate private network (100 Mbit/s) is set up between the machine

computer and the Vision computer via a subnet mask.

Fixed IP addresses for the machine computer and the Vision computer can thus be assigned for all

SIPLACE machines. These IP addresses are not known outside the private network, for instance in

the SIPLACE LAN or customer LAN.

These IP addresses need not be further configured by the operator while the station software is

being installed.

Station Software 705.04 / Installation Manual Ausgabe 07/2011 Edition

5 Installing the machine computer

5.1 Installation sequence

See separate Installation Manuals for details on

installing the Windows XP or Windows XP Embedded

operating system (item no. 00196151-xx and

00196737-xx respectively)

For details on calibrating the touchscreen, see section

5.2.3.

See section 5.3.

See section 5.4.

See section 5.4.7.

Figure 5-1: Installation sequence

Station Software 705.04 / Installation Manual Ausgabe 07/2011 Edition

5.2 Preparations for installing the software

5.2.1 Requirements

Requirements for installing the SIPLACE software and the Vision computer software:

– The Windows XP embedded operating system with Service Pack 2 must be installed on the

machine computer and in two-computer operation on the Vision computer (see "Installation

Manual Operating System Windows XP Embedded SP2 for 70x", item number 00196737-xx)

– The Windows XP Professional operating system with

Service Pack 3 and all current

hotfixes (SIPLACE Hotfix CD) must be installed on the machine computer and in two-computer

operation on the Vision computer (see the Installation Manual for the Windows XP operating

system, item number 00196151-xx).

NOTICE

The Windows XP Embedded operating system is only used for new installations. On

upgrading to station software version 704 or higher, there will be no operating system

change from Windows XP Professional to Windows XP Embedded.

Under Windows XP Professional the default Windows display settings have to be changed and

the touch screen has to be calibrated. Under Windows XP Embedded only the touch screen has

to be calibrated. You must be logged in as Administrator

in order to be able to carry out this

work.