00196429-0102 - AI Head Reconfiguration Kit SX12 C&P20A_de_en.pdf - 第43页

Brief Description Reconfiguration Duration Requirements and Restrictions for the C &P20A Placement Head Assembly Instructions / Montageanleitung Head Reconfiguration K it C&P20A 43 Requirements and Restrict ions …

Brief Description

Tools and Equipment Required Options for C&P20

42 Assembly Instructions / Montageanleitung Head Reconfiguration Kit C&P20A

Options for C&P20

2.1.3 Options for C&P20

Tools and Equipment Required

2.2 Tools and Equipment Required

00519715-xx Nozzle changer CP20 SX1/2

00519843-xx Nozzle changer CP20 SX1/2 (Pos.3o.4)

00519848-xx Verify reject bin, SX1/2

03071171-xx Starter kit for maintenance CPx and TwinHead

00384696-xx Service box nozzle 20-Segm. C+P head

Designation Item No.

Torque wrench 03078400-xx (old version: 00376504-xx)

Extension with joint (170 x SK3) 03042635-xx

Extension straight (170 x SK3) 03043440-xx

Tool extension straight TX20 03073256-xx

Bit holder for TorqueVario screwdriver 03078706-xx

Depth measuring gauge 200 mm 03079617-xx

Pressure test device with measurement cable 00313523-xx

Conversion kit COT insert X 00378465-xx

Mapping Plate SX 560x460 Set

Alu Mapping Plate 560 x 460 D, SX1/2

03076118-xx

03076765-xx

Calibration tool version 3 CPP 03010565-xx

Calibration tool version SST23 CP20 03034148-xx

Assembly Instructions Stationary Camera SX Se-

ries

00196608-xx

Assembly Instructions SIPLACE SX 1/2 Nozzle

Changer

00196578-xx

Assembly Instructions Reject Bin SIPLACE SX Se-

ries

00196615-xx

Assembly Instructions Stationary Camera Type 25

SIPLACE X Series, SX1/2, D3 and D1

00194554-xx

Service Manual SX1/2 00196496-xx

Brief Description

Reconfiguration Duration Requirements and Restrictions for the C&P20A Placement Head

Assembly Instructions / Montageanleitung Head Reconfiguration Kit C&P20A 43

Requirements and Restrictions for the C&P20A Placement Head

2.3 Requirements and Restrictions for the C&P20A Placement Head

▪ When using third party feeder modules pay particular attention on the crash danger.

▪ In a placement area with 2 gantries the C&P20A can only be operated together with another C&P20A

placement head.

▪ The C&P20A cannot be operated with an MTC2 in the same placement area.

▪ Only use the nozzle changers and camera types appropriate for this head type as well as the elec-

trical boards described in this manual. Remove all boards that do not belong to this head type. Oth-

erwise there is the danger of a crash.

▪ When using a C&P20A head no magazines of the CPP head are allowed on the nozzle changer. For

the new basic unit for nozzle changers, this is monitored by the software. The new basic unit is suited

for the nozzle changer magazines of the CPP head and the C&P20A head.

▪ Do not use a linear feeder together with a C&P20A placement head.

Reconfiguration Duration

2.3.1 Reconfiguration Duration

The following reconfiguration durations per head can be expected:

Placement head Single-/Double conveyor Task

Disassembling CPP 20 min Without options such as nozzle changers, verify

component reject bin and stationary camera

Disassembling

C&P20A

20 min Without options such as nozzle changer, verify

component reject bin

Disassembling Twin-

Head

30 min Verify Component reject bin

Assembling CPP 90 / 120 min With mapping and without options such as nozzle

changer, verify component reject bin and stationary

camera

Assembling C&P20A 90 / 120 min With mapping and without options such as nozzle

changer, query component reject bin

Assembling Twin-

Head

90 / 120 min With mapping and without options such as nozzle

changer, verify component reject bin and stationary

camera

Brief Description

Head Modularity SX 70x SIPLACE SX 1

44 Assembly Instructions / Montageanleitung Head Reconfiguration Kit C&P20A

Head Modularity SX 70x

2.4 Head Modularity SX 70x

The following head configuration options are available:

SIPLACE SX 1

2.4.1 SIPLACE SX 1

Head configurations on the SIPLACE SX 1

SIPLACE SX 2

2.4.2 SIPLACE SX 2

Head configurations on the SIPLACE SX 2

Gantry 1 Default cameras Options

C&P20A STT 23 ----

CPP_H SST 29 Component camera SST 38

Stat. camera SST 33 (from FS 04 and in low installation posi-

tion only)

CPP_L SST 29 Component camera SST38

TwinHead SST 33 Stat. camera SST 25 (location 1 only)

3D coplanarity module ST 37 (location 1 only)

Gantry 1 / Gantry 2 Default cameras Options

C&P20A / C&P20A STT 23 ----

CPP_H / CPP_H SST 29 Component camera SST 38

Stat. camera SST 33 possible on location 1 and

2 (from FS 04 and in low installation position on-

ly)

CPP_L / CPP_L SST 29 Component camera SST38

CPP_H / TwinHead STT 29 (on gan-

try 1)

Twin SST33 (on

gantry 2)

CPP:

Component camera SST 38

Stat. camera SST 33 (from FS 04 and in low in-

stallation position only)

TwinHead:

Stat. camera SST 25 (location 1 only)

3D coplanarity module SST 37 (location 1 only)

TwinHead / TwinHead SST 33 Stat. camera SST 25 (location 1 only)

3D coplanarity module ST 37 (location 1 only)