00193411-02.pdf - 第29页

User Manual SIPLAC E HS-60 2 Operational safety Software version SR.503.xx 07/2003 US Edition 2.2 Warning labels 29 DANGER OF CRUSHING! Danger of crushing for person s with passive me tal impl ants (e.g. pl ates, sc rews…

100%1 / 198
2 Operational safety User Manual SIPLACE HS-60
2.2 Warning labels Software version SR.503.xx 07/2003 US Edition
28
WARNING 2
– Do not use abrasive cleaners or solvents for cleaning warning labels.
– Replace any damaged or illegible warning labels.
2.2.1.1 Warning label W201
2
Item W201 in Fig. 2.2 - 1 (number per machine: 1)
2.2.2 Warning label W202
2
Item W202 in Fig. 2.2 - 1 (number per machine: 4)
WARNING!
Powerful permanent magnetic fields inside the machine
RISK OF DEATH!
Risk of death for persons with active implants (e.g. pacemakers, insulin pumps, defibrillators).
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
SAFE OPERATION OF THE MACHINE
Safe operation of the machine depends absolutely on the
operator being familiar with the user manual and safety
instructions and putting them into effect.
User Manual SIPLACE HS-60 2 Operational safety
Software version SR.503.xx 07/2003 US Edition 2.2 Warning labels
29
DANGER OF CRUSHING!
Danger of crushing for persons with passive metal implants (e.g. plates, screws).
Do not reach into the machine or bend towards it when the protective covers are open.
Do not bring any metal objects into the area.
2.2.2.1 Warning label W203
2
Item W203 in Fig. 2.2 - 1 (number per machine: 4)
2.2.2.2 Warning label W204
2
Item W204 in Fig. 2.2 - 1 (number per machine: 8)
2.2.3 Warning label W205
2
Item W205 in Fig. 2.2 - 1 (number per machine: 12)
2
2
2
DANGER OF CRUSHING!
Reaching in here can lead to injuries to the arms and
hands.
Do not reach into the machine while it is running
2
2
2
DANGER OF CRUSHING!
Reaching in here can lead to injuries to the arms and
hands.
Do not reach into the machine while it is running
2
2
2
2
2
2
2
2
RISK OF CUTTING!
Danger of cutting is present even when the machine
is switched off
2 Operational safety User Manual SIPLACE HS-60
2.2 Warning labels Software version SR.503.xx 07/2003 US Edition
30
2.2.3.1 Warning label W205 on the transverse bar below the tape cutter
2
Fig. 2.2 - 2 Warning label W205 on the transverse bar below the tape cutter
2
(1) Tape cutter
(2) Waste tape chute
Item W205, part no. 03009344-01
WARNING 2
If you wish to do work on the tape cutter, you must disconnect the machine from the mains sup-
ply and the compressed air supply.
Wait until the operating pressure has dropped to 0 MPa.
Wear robust protective gloves when working on the tape cutter.