PNOZ_X2_8P_Operat_Manual_1004082-EN-21.pdf - 第5页
PNOZ X2.8P Operating Manual PNOZ X2.8P 1004082-EN-21 | 5 Introduction Validity of documentation This documentation is valid for the product PNOZ X2.8P. It is valid until new documentation is published. This operating man…
Contents
Operating Manual PNOZ X2.8P
1004082-EN-21
| 4
Remove plug-in terminals .....................................................................................................31
Order reference ......................................................................................................................31
EC declaration of conformity ................................................................................................ 32
UKCA-Declaration of Conformity .........................................................................................32
PNOZ X2.8P
Operating Manual PNOZ X2.8P
1004082-EN-21
| 5
Introduction
Validity of documentation
This documentation is valid for the product PNOZ X2.8P. It is valid until new documentation
is published.
This operating manual explains the function and operation, describes the installation and
provides guidelines on how to connect the product.
Using the documentation
This document is intended for instruction. Only install and commission the product if you
have read and understood this document. The document should be retained for future ref-
erence.
Definition of symbols
Information that is particularly important is identified as follows:
DANGER!
This warning must be heeded! It warns of a hazardous situation that poses
an immediate threat of serious injury and death and indicates preventive
measures that can be taken.
WARNING!
This warning must be heeded! It warns of a hazardous situation that could
lead to serious injury and death and indicates preventive measures that can
be taken.
CAUTION!
This refers to a hazard that can lead to a less serious or minor injury plus
material damage, and also provides information on preventive measures
that can be taken.
NOTICE
This describes a situation in which the product or devices could be dam-
aged and also provides information on preventive measures that can be
taken. It also highlights areas within the text that are of particular import-
ance.
PNOZ X2.8P
Operating Manual PNOZ X2.8P
1004082-EN-21
| 6
INFORMATION
This gives advice on applications and provides information on special fea-
tures.
Safety
Intended use
The safety relay PNOZ X2.8P provides a safety-related interruption of a safety circuit.
The safety relay meets the requirements of EN 60947-5-1 and EN 60204-1 and may be
used in applications with:
} E-STOP pushbuttons
} Safety gates
} Light grids and safety switches with detection of shorts across contacts
The following is deemed improper use in particular
} Any component, technical or electrical modification to the product,
} Use of the product outside the areas described in this operating manual,
} Use of the product outside the technical details (see Technical details [ 17]).
NOTICE
EMC-compliant electrical installation
The product is designed for use in an industrial environment. The product
may cause interference if installed in other environments. If installed in other
environments, measures should be taken to comply with the applicable
standards and directives for the respective installation site with regard to in-
terference.
Safety regulations
Safety assessment
Before using a device, a safety assessment in accordance with the Machinery Directive is
required.
The product as an individual component fulfils the functional safety requirements in accord-
ance with EN ISO 13849 and EN 62061. However, this does not guarantee the functional
safety of the overall plant/machine. To achieve the relevant safety level of the overall plant/
machine’s required safety functions, each safety function needs to be considered separ-
ately.