00194335-02.pdf - 第24页
2 Retrofit instructions Coplanarity module - SIPLACE HF ser ies Coplanarity module 10/2004 Edition 24 : Disconn ect the ca ble at X22ra. : Connect the new cabl e (030217 51-01) at X 22ra2 and X2 2ra. 2 Fig. 2.10 - 1 SUB …
Coplanarity module 2 Retrofit instructions Coplanarity module - SIPLACE HF series
10/2004 Edition
23
: Screw the coplanarity module onto the mount (3 M4 x 8 screws counter sunk).
2
: Screw on the mount for the coplanarity module (2 x M6x12):
Top screw + bottom screw (in top holes in the base).
2
2
: Open the door of the extension kit without servo unit on the output belt side.
: Pull the connecting cable for the coplanarity module through the machine base using the
threading aid.
2
2
2
2
2
2
2
2
2
2
2
2
Screws
2 Retrofit instructions Coplanarity module - SIPLACE HF series Coplanarity module
10/2004 Edition
24
: Disconnect the cable at X22ra.
: Connect the new cable (03021751-01) at X22ra2 and X22ra.
2
Fig. 2.10 - 1 SUB Distributor
2
2
2
2
2
2
2
2
Connect at these
plugs
Cable with 2 plugs
Coplanarity module 2 Retrofit instructions Coplanarity module - SIPLACE HF series
10/2004 Edition
25
: Fix the cable using cable ties.
: Run it through the machine base.
2
2
: In the computer unit, remove the shield for the coplanarity processor (TORX key size 8).
: Install the coplanarity processor (slotted-head screwdriver).
2
2
2
2
2
2
2
2
2
2
2
Recess in the
machine base
Cable
Cable ties