5-p0921-0943-vba_en.pdf - 第17页

Drain valve IN PORT 1/4 19 OUT PORT 1/8 20 ø30 58 (CLOSE) to 63 (OPEN) 52 65 3/8 22 ø18.5 Safety valve Safety valve VBAT-R, VBAT-S  Drain valve VBAT-V1  (Width acrass flats 19) Options/Accessories/P art No. Model VBAT0…

Specifications

CE Certified Product

Standard Product (For Japanese Market)

Booster regulator

VBA2AVBA1A VBA4A



—



—

1. Operating pressure

• Operate this product below the maximum operat-

ing pressure. If it is necessary, take appropriate

safety measures to ensure that the maximum op-

erating pressure is not exceeded.

• When the tank alone is used

Use a pressure switch or a safety valve to ensure

that the maximum operating pressure is not ex-

ceeded.

2. Connection

• Connect a filter or a mist separator to the OUT

side of the tank. Because the inner surface of the

tank is untreated, there is a possibility of dust

flowing out to the outlet side.

• A VBA booster regulator can be connected

directly with the tank accessories as indicated

combinations below.

• Consider the operating conditions and operate

this product within the specification range.

• When using the air tank with a booster regulator,

refer to “Sizing” on page 928 or SMC Pneumatic

System Energy Saving Program.

Warning

Caution

Design

Selection

Caution

1. Accessories

• Refer to the operation manual regarding combin-

ing booster regulators with older model air tanks.

• The accessories are secured by bands to the feet

of the air tank. Once removed, make sure not to

lose them.

2. Installation

• Install the tank away from people. It is dangerous

if the accumulated air inside the tank were to

seep out.

• Do not mount the air tank on a moving part or a

place with vibration. If it must be used in such an

area due to unavoidable circumstances, please

contact SMC beforehand.

• When connecting a booster regulator with the

tank, refer to the operation manual first, which is

provided with the air tank before assembling.

• To mount the air tank on a floor surface, use the

four holes to secure the tank with bolts or anchor

bolts.

Mounting

Warning

1. Inspection

• The use of pressure vessels could lead to an un-

expected accident due to external damage or

internal corrosion caused by drainage. Therefore,

make sure to check periodically for external

damage, or the extent of internal corrosion

through the port hole. An ultrasonic thickness

indicator may also be used to check for any re-

duction in material thickness.

2. Draining

• If this product is used with a large amount of

drainage, the drainage could flow out, leading to

equipment malfunction or corrosion inside the

tank. Therefore, drain the system once a day.

Maintenance

Model

VBAT051 VBAT101 VBAT201 VBAT381

Fluid

Tank capacity (L)

IN port size

OUT port size

Ambient and fluid temperature

(°C)

Weight (kg)

Material

Paint

Max. operating

pressure (MPa)

3/8

6.6

3.2

3/8

1/2

4.9

1/2

3/4

VBATA1

VBATS1

VBATA1

VBATS1

VBATA1

VBATS1

VBATA1

VBATS1

Compressed air

2.0

0 to 75

Carbon steel (SS400)

Stainless steel 304

Outside: Silver paint, Inside: Rustproof paint

None

VBAT05A

VBAT05S

VBAT10A

VBAT10S

VBAT20A

VBAT20S

VBAT38A

VBAT38S

2.0 1.0

Note) The accessories and options are included in the same container.

Model

VBAT05A

-SV-Q

VBAT10A

-SV-Q

VBAT20A

-RV-Q

VBAT38A

-RV-Q

Fluid

Tank capacity (L)

Max. operating pressure

(MPa)

IN port size

OUT port size

Ambient and fluid temperature

(°C)

Weight (kg)

Material

Paint

3/8

6.6

1/2

3/4

1/2

3/4

Compressed air

0 to 75

Carbon steel (SS400)

Outside: Silver paint, Inside: Rustproof paint

2.0 1.0

Note) The accessories and options are included in the same container.

Product Not Applicable to the ASME Standard

Model

VBAT05A1--X11 VBAT10A1--X11

Fluid

Tank capacity (L)

Max. operating pressure

(MPa)

IN port size

OUT port size

Ambient and fluid temperature

(°C)

Weight (kg)

Material

Paint

3/8

6.6

3/8

1/2

Compressed air

2.0

0 to 75

Carbon steel (SS400)

Outside: Silver paint, Inside: Rustproof paint

Note) The accessories and options are included in the same container.

Air tank

No applicable standard

Thailand, Taiwan

Standard product

List of Air Tank for Overseas

South

Korea

High Pressure Gas

Safety Control Act

Occupational Safety

and Health Act

Exempted product

Max. operating pressure:

0.97 MPa

VBAT05A-X101

VBAT10A-X101

VBAT20A-X101

VBAT38A-X101

VBAT05S-X101

VBAT10S-X101

VBAT20S-X101

VBAT38S-X101

VBAT-K (Safety valve)

VBAT-V1 (Drain valve)

Option (Order it separately.)

Country/Region

Law

Exportable models

Material: Carbon steel

Material: Stainless steel

Details

Series VBAT

China

Safety valve/

Pressure gauge set

and product certificate

are included.

Simple Pressure

Vessels Safety

and Technical

Regulations

VBAT05A1-U-X104

VBAT10A1-U-X104

VBAT20A1-T-X104

VBAT38A1-T-X104

936

Drain valve

IN PORT

1/4

OUT PORT

1/8

ø30

58 (CLOSE) to

63 (OPEN)

3/8

ø18.5

Safety

valve

Safety valve VBAT-R, VBAT-SDrain valve VBAT-V1

(Width acrass flats 19)

Options/Accessories/Part No.

Model

VBAT05A-SV-Q VBAT10A-SV-Q VBAT20A-RV-Q VBAT38A-RV-Q

Accessory kit

Safety valve

Drain valve

VBAT5A-Y-2

VBAT-S (Set pressure: 2 MPa)

VBAT-V1

VBAT10A-Y-2 VBAT20A-Y-2

VBAT-R (Set pressure: 1 MPa)

Model

VBAT05S1- VBAT10S1- VBAT20S1- VBAT38S1-

Accessory kit

Drain valve (When selecting an option)

VBAT5S-Y-4

VBAT-V1

VBAT10S-Y-4 VBAT20S-Y-4

Model

VBAT05A1--X11 VBAT10A1--X11

Accessory kit

Safety valve (When selecting an option)

Drain valve

(When selecting an option)

VBAT5A-Y-3 VBAT10A-Y-3

VBAT-S (Set pressure: 2 MPa)

VBAT-V1

VBAT05AN1--X11 VBAT10AN1--X11

VBAT5A-Y-3-X11 VBAT10A-Y-3-X11

VBAT-SN (Set pressure: 2 MPa)

VBAT-V1N

Model

VBAT05A1- VBAT10A1- VBAT20A1- VBAT38A1-

For VBATA1 (Carbon Steel)

Accessory kit

Safety valve (When selecting an option)

Note 1) 2)

Drain valve (When selecting an option)

VBAT5A-Y-3

VBAT-R (Set pressure: 1 MPa), VBAT-S (Set pressure: 2 MPa)

VBAT-V1

VBAT10A-Y-3 VBAT20A-Y-3

VBAT-R (Set pressure: 1 MPa)

Note 1) The set pressure of the safety valve cannot be changed.

Note 2) The safety valve is a safety measure that protects the tank from excess pressure. The valve opens automatically when the specified pressure is reached, releasing excess

pressure inside the tank. The valve closes again when the pressure drops below a designated value. Select a pressure valve appropriate for the maximum operating

pressure specification of the tank.

Copper-free/Fluorine-free

Note 1) The thread type for each port is Rc.

Note 2) A stainless steel fitting and a needle valve are

included in the same container as accessories.

(For detailed dimensions, please contact SMC.)

It can be ordered separately.

Note 3) Since neither copper nor fluorine parts are used

for the tank, a standard model can be used when

drain valve is not necessary.

Note 4) The material of the safety valve is brass only.

20 1VBAT V

Made to Order

Copper-free/

Fluorine-free

Made to Order

Material

Carbon steel (SS400)

Stainless steel 304

Material

Drain valve/

VBAT-V2

Symbol

Internal capacity

5 L

10 L

20 L

38 L

Tank internal

capacity

Symbol

A10

For VBATS1 (Stainless Steel)

For detailed dimensions, specifications

and lead times, please contact SMC.

Thread type

NPT

Model

Description

No.

VBAT5A-Y-3

VBAT5S-Y-4

The Accessory Kit is a Set of Nos. q to r. (For CE Compliant Product: ty)

O-ring

Hexagon socket head

cap screw

Anchor bolt/nut

Bushing assembly

—

VBAT10A-Y-3

VBAT10S-Y-4

1 (VBA1A)

1 (VBA2A)

4 (VBA1A)

4 (VBA2A)4 (VBA2A)

—

VBAT20A-Y-3

VBAT20S-Y-4

—

VBAT5A-Y-2

—

VBAT10A-Y-2

1 (VBA1A)

1 (VBA2A)

4 (VBA1A)

4 (VBA2A)4 (VBA2A)

—

VBAT20A-Y-2

Quantity

Hexagon socket head taper screwed plug

(For drain port)

Hexagon socket head taper screwed plug

(For safety valve port)

Air Tank Series V BAT

Body material: Brass

VBAT-V2 (A set of stainless steel needle valve and fitting) is included with the standard product.

937

ARJ

AR425

to 935

ARX

AMR

ARM

ARP

IRV

VEX

SRH

SRP

SRF

VCHR

ITV

ITVX

PVQ

VEF

VEP

VER

VEA

VY1

VBA

VBAT

AP100

VBA

VBAT

Booster regulator

IN port

Rc 3/8

120

180

(454)

(367)

OUT

4 x ø11

EXH: Rc 3/8

Tank OUT port

Rc 1/2

Drain port

Rc 1/4

278

170

312

460

471

∗

ø180

Booster regulator

IN port

Rc 1/4

OUT

Tank OUT port

Rc 3/8

Tank OUT port

Rc 1/2

200

163

170

278

(391)

(328)

257

338

349

∗

Drain port

Rc 1/4

Drain port

Rc 1/4

312

460

471

∗

Spare port

Rc 1/2

Spare port

Rc 1/2

Spare port

Rc 1/2

Spare port

Rc 1/2

EXH: Rc 1/4

4 x ø11

120

180

ø180

100

200

(A)

(B)

OUT

4 x ø13

EXH:

Tank OUT port

Rc 1/2

Drain port

Rc 1/4

305

180

5050

685

∗

400

674

ø206

442

(417)

ø180

(367)

180

120

EXH: Rc 3/8

4 x ø11

Booster regulator IN port

Rc 3/8

OUT

(A)

(B)

ø206

200

100

EXH:

OUT

Booster regulator IN port

4 x ø13

Tank IN port

Rc 3/8

Tank IN port

Rc 3/8

Tank IN port

Rc 3/8

Tank IN port

Rc 1/2

Booster regulator

IN port

Rc 1/4

OUT

(307)

(370)

EXH: Rc 1/4

4 x ø11

100

160

ø156

Booster regulator

IN port

Connected to VBA20A

Series V B AT

Dimensions: Standard Product (For Japanese Market)

∗ The length may be longer than the specification

if the plugs mounted on the tank are not fit to the end.

∗ The length may be longer than the specification

if the plugs mounted on the tank are not fit to the end.

∗ The length may be longer than the specification

if the plugs mounted on the tank are not fit to the end.

Connected to VBA22A

Connected to VBA22A, 42A

Note) When option G (pressure gauge) is selected

(mm)

Note)

—

469

493

394

429.8

394

429.8

Rc 3/8

Rc 1/2

Rc 3/8

Rc 1/2

481

520

444

477

VBA20A

VBA40A

VBA22A

VBA42A

Booster regulator model

∗ The length may be longer than the specification if the plugs mounted on the tank are not fit to the end.

Connected to VBA10A, 11A

VBAT05A1

Material: Carbon steel

Connected to VBA10A, 11A

VBAT10A1

Connected to VBA20A, 40A

VBAT20A1

938