5OM-1286-007_w.pdf - 第17页
Safety Precautions Safe-6 AJQE-ID Notes on Machine Operations This machine uses energetic driving systems and high voltage to run at high speed. This power and voltage is high enough to cause death or serious injury . …
Safety Precautions
Safe-5
AJQE-ID
0606-005
In principle, the overall operation of the machine including the button
operations on the operation panel and the touch screen must be controlled by
only one person.
If there are more than one, ensure good communication by giving loud verbal
instructions.
Before starting the automatic operation, check carefully that there is no person around
the machine (especially on the other side of the machine operation). Make sure that no
objects (tools, parts, etc.) are left behind.
Data may become unavailable due to breakdown or mishandling of the machine.
It is strongly recommended that the hard disk data be periodically backed up with the
network terminal (option).
Do not use the floppy disk drive in the control box.
The drive is provided only for the
authorized maintenance personnel.
Safety Precautions
Safe-6
AJQE-ID
Notes on Machine Operations
This machine uses energetic driving systems and high voltage to run at high
speed. This power and voltage is high enough to cause death or serious injury.
To avoid this danger
, respect the following guideline.
• The machine must be used with the covers being attached.
• Be sure to close the covers (door type) before operating the machine.
• Do not disengage the interlock mechanism of the covers (door type).
Whenever you feel danger or abnormality, immediately press the
[EMERGENCY ST
OP] switch to stop the machine.
If the machine is kept running in abnormal condition, an accident or a
breakdown will result.
Confirm that the "LOCK" lamp (green) is ON on the operation panel before
operating the machine.
If the "LOCK" lamp is not turned ON, the machine can be operated at any time
from both front and rear sides, endangering the operators around the machine.
When there is a problem with the machine, locate the cause and assess the
condition. Set the power breaker to "OFF".
After the problem has been rectified completely
, reset the machine to its
normal condition.
When the green lamp of the light tower is ON or flickering (ON and OFF), it indicates
that the static machine is in the "Automatic" mode (standby mode).
In case of a disaster of any kind, earthquake, storm, flood, fire, or lightning,
immediately stop the machine and turn off the power supply
.
When the machine stops due to a component pickup error
, be sure to remove the
mispicked component from the feeder and start the automatic operation.
Do not use any unspecified feeders.
0606-005
Safety Precautions
Safe-7
AJQE-ID
Notes on Installation, Transfer and Maintenance
Do not install or transfer the machine on the customer side after shipment.
T
o ensure perfect operation of the machine, including safety and accuracy, only our
installation service department will install the machine or transfer it to another place.
Only the maintenance work on items described in this manual should be performed by
the customer. Please read the instruction manual carefully before maintenance work.
Do not perform any maintenance work on items that are not described in this manual.
Otherwise, not only breakdown of the machine but also personal injury may result.
When an alert label has deteriorated and become illegible, contact our service
department.
0606-005