00196743-01 - Install Guide SIPLACE Explorer 2.7_en.pdf - 第84页
4 Co nfi gur at io n Ins t a llat i on and Con f i gur at ion Guid e SI PLA CE Ex plo rer 4. 2 C on figur ing th e Fa cto ry Conf igu rat ion U til ity Ed iti on 03 /2 010 EN 84 The User De t ail s dialog box will open. …
Installation and Configuration Guide SIPLACE Explorer 4 Configuration
Edition 03/2010 EN 4.2 Configuring the Factory Configuration Utility
83
4.2.5.1 How to Use the User Management
→ Select the Users tab.
4
Fig. 4 - 45 Factory Configuration Utility - users
→ Now add the individual users by clicking on the Add User icon.
4 Configuration Installation and Configuration Guide SIPLACE Explorer
4.2 Configuring the Factory Configuration Utility Edition 03/2010 EN
84
The User Details dialog box will open. Enter the user-specific details such as access data and
user privileges here. 4
4
Fig. 4 - 46 Factory Configuration Utility - user details
→ Enter the user name in the Login field.
→ Enter the user login password in the Password field.
→ In the Confirm Password field, reenter (confirm) the password you specified in the Password
field.
→ Enter the user's e-mail address in the E-Mail field. The generated reports will be sent to this e-
mail address.
→ Enter a user description e.g. administrator in the Description field.
NOTE
If you define the default users "Admin" and "Operator" from Runtime Environment in this
Description field, these default users will become invalid in the Runtime Environment. 4
Installation and Configuration Guide SIPLACE Explorer 4 Configuration
Edition 03/2010 EN 4.2 Configuring the Factory Configuration Utility
85
→ Enter the user privileges in the Default user rights field. Then enable the corresponding
checkboxes.
→ Define the user privileges for each production line at User rights profile. If you have enabled
the Use default user rights field for a particular line, the system will automatically adopt all
the rights/privileges you have enabled/disabled for that user at Default user rights. The
checkboxes on the right-hand side will then be faded out (gray) i.e. they can not be
subsequently enabled or disabled.
→ Check your entries and confirm with OK.
→ Repeat this procedure for each other user.
The list of defined users will be shown in the Factory Configuration Utility - Users dialog box.4
4
Fig. 4 - 47 Factory Configuration Utility - users
→ In order to edit user details, select the user concerned from the list and click on the Details
icon. The User Details dialog box will open and the user details can be edited.
→ To delete a user from the list, click on remove user .