ts9800-user-guide-7511-0360_A.pdf - 第28页

28 Compatibili ty of seali ng ma terial w ith selected fluids Substance VITO N EPDM N BR Resistant materials Acetone non resistant resistant non resistant Ammo nia non resistant non r es is tant non resistant PEEK, PT FE…

100%1 / 52
27
10. Place all parts in a beaker with proper cleaning solution;
Isopropanol or Acetone can be used for cleaning. Caution:
Please refer to your facility regulation for proper solvent
usage.
11. Place the beaker with all parts in an Ultrasonic bath for about
15 – 30 minutes.
Caution: The nozzle insert can be cleaned and pierced through with
special nozzle insert wire using the Pin Vice. Pay attention to the
nozzle insert diameter and choose the correct nozzle insert wire.
Refer to the pictures below regarding which part to clean with which
cleaning tool.
Make sure to lubricate the tappet assembly and nozzle bushing’s
O-rings with the provided tappet grease prior to re-assembling.
28
Compatibility of sealing material with selected fluids
Substance
VITON
EPDM
NBR
Resistant
materials
Acetone
non resistant
resistant
non resistant
Ammonia
non resistant
non resistant
non resistant
PEEK,
PTFE
Chloroform
resistant
non resistant
non resistant
Cyclohexane
resistant
non resistant
resistant
Cyclohexanol
resistant
non resistant
resistant
Dimethyl
formamide
(DMF)
non resistant
resistant
non resistant
PEEK
Acetic acid
non resistant
non resistant
non resistant
PTFE
Ethanol
non resistant
resistant
resistant
Heptane
resistant
non resistant
resistant
Hexane
resistant
non resistant
resistant
Isopropanol
resistant
resistant
partially
resistant
Methylene
chloride
partially
resistant
non resistant
non resistant
PEEK,
PTFE
Nitromethane
non resistant
partially
resistant
non resistant
PTFE
Pentane
resistant
non resistant
resistant
Mercury
resistant
resistant
resistant
Silicon oil
resistant
resistant
resistant
Toluene
non resistant
non resistant
non resistant
PEEK,
PTFE
Water
no
information
no information
no
information
PEEK,
PTFE
Xylene
resistant
non resistant
non resistant
Table 2 – Chemical compatibility of sealing materials
29
8. TS9800 JET VALVE
8.1 Valve Modules
The TS9800 Series consists of three basic modules:
• Actuator System module (1)
• Fluid Manifold module (2)
• Nozzle Unit module (3)
Figure 5: TS9800 Jet Valve
Figure 6: Jet Valve’s internal operation