Stopper ASE HS60.pdf - 第21页
Retrofit Instructions: Stopper for ASE SIPLACE HS-60 (special design) 11/2005 Edition 21 2 Retrofit Instructions: S t opper for ASE SIPLACE HS-60 (special design) 2.1 Description of the functions Installing a mechanical …
Nachrüstanleitung SOKO Stopper für ASE SIPLACE HS-60
Ausgabe 11/2005
20
Retrofit Instructions: Stopper for ASE SIPLACE HS-60 (special design)
11/2005 Edition
21
2 Retrofit Instructions: Stopper for
ASE SIPLACE HS-60 (special design)
2.1 Description of the functions
Installing a mechanical stopper module allows the processing area to be varied as required. The
conveyor firmware special design deactivates the light barrier in the placement area and inte-
grates the stopper module with sonar sensor. 2
The conveyor TSP firmware also takes account of the lifting table clamp for the ASE special de-
sign. 2
2.2 Requirements
2.3 Restrictions
– To calibrate the conveyor edges you have to remove the stopper module, because the mini-
mum conveyor width is about 52 mm.
– if you have a conveyor with pressure sensor you have to deactivate the sensor at conveyor
control TSP-301 switch S4 number 3.
Software:
SC 503.xx
Hardware:
HS-60, both transport modes
Retrofit Instructions: Stopper for ASE SIPLACE HS-60 (special design)
11/2005 Edition
22
2.4 Deliverables
– Stopper adapter plate for conveyors with pressure sensor
– Assembly rail
– Stopper module
– Spacers M3 x 5 mm
– Spacer washers 13 mm diameter
– Countersunk head screws M4 x 16 mm for TSP without pressure sensor
– Countersunk head screws M4 x 10 mm for TSP with pressure sensor
– Cable ties
– Cable clips
– Diskette with firmware version TS510446.HEX
2.5 Tools required
– Set of hexagon socket spanners
– Phillips screwdriver
– Set of fork wrenches
–Side cutter
– Hose pliers
2