WPC an:on SIPLACE SX1:SX2 Montageanleitung : Assembly Instructions.pdf - 第57页
2 Brief description Mo nt ag ea nl ei tu ng / A ss em bl y In st ru ct io ns W PC a n/ on S IP LA CE S X1 /S X2 - 0 3/ 20 25 57 2 Brief description 2.1 Overview of WPC5/WPC6 Fig.6: Overview of WPC 1. SIPLACE SX1/SX2 2. …
1 Introduction
56 Montageanleitung / Assembly Instructions WPC an/on SIPLACE SX1/SX2 - 03/2025
1.4.5 Release History
Document
WPC5 on the SIPLACE SX1/SX2
Assembly Instructions
Edition Changes
06/2009 Initial release
12/2011 Revision and supplements
03/2014 Adjustments and supplements:
●
Dimensions and weight: Supplements for component heights of the different
WPC types
●
Parts, Equipment and Tools
●
Formal adjustments
●
Installation of CAN nodes
●
Start up sequence with two WPCs
●
Minor corrections and supplements
01/2016 Amendments and supplements:
●
CAN bus terminator for CO table
03/2025
●
Chapter "Excerpts from the Service Manual":
– Waste Type Chute and Compressed Air Supply added
– Downholder updated
●
Rebranding
●
Minor changes
1.5 Staff qualifications and training
Qualified or adequately trained personnel means that these people are familiar with the setting up,
operation and maintenance of the machine and the add-on devices and are suitably qualified, e.g.:
●
Have been trained, instructed or authorized to switch on and off, isolate, earth and identify elec-
trical circuits and system components in accordance with normal safety standards.
●
Have been trained or instructed in the upkeep and use of appropriate safety equipment in accor-
dance with normal safety standards.
2 Brief description
Montageanleitung / Assembly Instructions WPC an/on SIPLACE SX1/SX2 - 03/2025 57
2 Brief description
2.1 Overview of WPC5/WPC6
Fig.6: Overview of WPC
1. SIPLACE SX1/SX2
2. WPC6
3. Non-Stop Module (only WPC6)
4. 30-track changeover table
2.1.1 Overview of the Modules
Fig.7: Overview of the modules
1. Protective door
2. Non-Stop Module (only WPC6)
3. EMERGENCY STOP button
4. Main switch
5. Protective covers on the power supply
6. Crank handle for lifting or lowering the trol-
ley carriage
7. Protective covers on the lifting mechanism
(tower)
8. Feed axis with waffle pack tray carrier
9. Cover over the feed axis drive
2 Brief description
58 Montageanleitung / Assembly Instructions WPC an/on SIPLACE SX1/SX2 - 03/2025
2.2 Overview of WPC5/6 COT Insert
Fig.8: Overview of the WPC5/6 Insert
1. Docking area for the WPC5/6
2. Docking area for the changeover table
with 30 locations
3. Connections for the component trolley
feed device
4. Installation point for the nozzle changer
5. Feeder control unit
2.3 Scope of Delivery
The following parts are required for the conversion (order separately if necessary):
●
Waffle pack changer WPC5 [00119827-xx]
or
waffle pack changer WPC6 [00119828-xx]
●
Component trolley feed device for WPC5 [03067206-xx]
●
Waste chute COT 30 [03073312-xx]
●
Changeover table SIPLACE SX, 30 feeder slots [00519722-xx]
●
If required, 2x upgrade kits COT-I 30 CAN-Switch 2. WPC [03085518-xx]
These two upgrade kits are required in case of two WPC installations on one machine.
In case of one WPC on one machine no upgrade kit is necessary.
●
Assembly instructions "WPC5 on SX1/SX2" [00196630-xx] (these instructions)
2.4 Tools and Equipment Required
●
Standard tooling
●
recommended
– Fit-up aid complete for COT-Insert P001 [03072616-xx]
– Suitable lifting device (e.g. hand-operated crane)